VFR Flight Following, the Radar Service Almost Every Student Ignores on Their First Solo Cross-Country, and the Three-Part Call That Puts You Under a Controller's Watch

VFR flight following is a free radar advisory service that gives student pilots an extra set of eyes on every cross-country - and it costs nothing but one radio call.

Flight Instructor
Reviewed for accuracy by Matt Carlson (Private Pilot)

VFR flight following is one of the most useful services available to general aviation pilots and one of the most underused. On your first solo cross-country, it puts a controller’s eyes on your track, provides traffic advisories, and gives you a resource if something starts to go wrong. All it takes is a single radio call.

What Is VFR Flight Following?

VFR flight following is officially called radar traffic advisory service. When you are receiving it, you have been radar identified, assigned a discrete transponder code, and a controller is actively watching your track on their scope. They will call out traffic, issue safety alerts, and can coordinate clearances if you are approaching controlled airspace that requires one.

It is not a separation service. That distinction matters. While receiving flight following, you remain responsible for see-and-avoid. The controller is providing advisories - not the same legal obligation they have with IFR traffic. The FAA Aeronautical Information Manual, Chapter Four covers this clearly and is worth reading before your first cross-country.

It is also not guaranteed. Flight following is a workload-permitting service, which means a controller can terminate it if their sector gets busy. When that happens, they will say something like “radar service terminated, squawk VFR, frequency change approved.” You go back to 1200 on the transponder, switch to the appropriate frequency, and continue on your own. Know this in advance so it does not catch you off guard.

Why ATC Wants to Hear from You

A common reason students skip flight following is the fear of being a nuisance. That concern is unfounded. Controllers providing radar services have workloads that vary throughout the day, and during quieter periods they are genuinely glad to work general aviation traffic. When they are busy, they are professionals - if they cannot accommodate you, they will say “unable.” That is the worst outcome of making the call.

The better framing: ATC wants to know you are up there. The radar service exists for you. Use it.

How to Pick Up Flight Following Before Departure

If you are departing a towered airport, the easiest approach is to request flight following from ground control or clearance delivery before you ever start the engine. Tell them you are requesting VFR flight following to your destination. They will either coordinate it before departure or instruct you to request it from departure control after takeoff. Either way, the groundwork is done before you leave the ground.

If you are departing a non-towered airport, you will contact either departure control or an Air Route Traffic Control Center (Center) once you are airborne. Frequencies are on your sectional chart and in your electronic flight bag - most apps list them in the airport information and in the airspace data along your route.

How to Make the Three-Part Call

The initial call has six components. Keep them in this order:

  1. Facility name
  2. Aircraft identification
  3. Aircraft type and equipment suffix
  4. Position and altitude
  5. Destination
  6. Request

A clean example: “Denver Center, Cessna one seven two, Niner Seven November, type Charlie, twenty miles northwest of Rocky Mountain Metropolitan, six thousand five hundred, VFR to Grand Junction, requesting flight following.”

If the controller responds with a squawk code and “ident,” enter the code and press the ident button. They will confirm radar contact and you are in the system.

If the frequency is busy when you call, wait for a gap. Do not step on other transmissions. Wait for a clean opening, then make a brief, unhurried call.

How to Give a Useful Position Report

Your position report is how the controller finds you on their scope. A vague report means more time before they can identify you. Use a compass bearing and distance from a known fix - a VOR, an airport, or a town. “Twenty miles northwest of Rocky Mountain Metropolitan” is better than “northwest of Denver.” “Over Greeley” is better still if that is accurate.

Specific position reports get you into the system faster.

What to Do Once You Are on Flight Following

Your radio workload while receiving flight following is straightforward. The controller talks; you answer.

When they call traffic - “Cessna Niner Seven November, traffic, twelve o’clock, five miles, opposite direction, altitude unknown, appears to be a light twin” - you respond with one of two things. If you have the traffic visually: “traffic in sight, Cessna Niner Seven November.” If you do not: “looking” or “negative contact” followed by your call sign. The controller needs that information to decide what to do next.

Report any altitude changes. If you are climbing or descending, say so: “Cessna Niner Seven November, descending to four thousand five hundred.” This keeps the controller’s picture accurate and prevents confusion as your data block moves on their scope.

How to Handle Sector Handoffs

On any real cross-country, you will pass through multiple sectors. When you reach the boundary of one controller’s area, they will hand you to the next: “Cessna Niner Seven November, contact Albuquerque Center, one three two point four five.” Copy the frequency, switch over, and check in briefly.

Your check-in call only needs to accomplish one thing - announce yourself and confirm you are with them. The new sector already has your information from the handoff. Something like “Albuquerque Center, Cessna Niner Seven November, six thousand five hundred, VFR to Grand Junction, with you” is enough.

After two or three handoffs, the routine becomes automatic.

Why This Matters: A Scenario

Consider a 120-mile solo cross-country at 4,500 feet, no flight following. Twenty miles from your destination, clouds are building to the north, you get task-saturated, and you briefly clip the edge of Class Bravo airspace before catching your track. Without flight following, no one warned you. The first indication something happened may be a letter from the FAA.

With flight following, the controller sees it coming and calls it out before you get there. That is not a hypothetical edge case. Airspace incursions happen to capable, careful pilots who got overloaded at the wrong moment. The radar service is an extra set of eyes, available on almost every cross-country you will fly, at no cost.

How to Prepare Before Every Cross-Country

Add this to your pre-flight planning routine:

Write down the departure control frequency, the center frequency or frequencies covering your cruise altitude and route, and the approach control frequency for your destination if it is a towered field. Put all of them in your nav log alongside your checkpoints. Plan to pick up flight following right after departure or at a reasonable altitude during climb. If they cannot take you, try again at your first waypoint. But try every time.

Practice the call before you get in the airplane. Say it out loud until it sounds natural:

“Departure, Piper Warrior, Six Niner Tango, type Alpha, ten miles south of Lincoln, two thousand climbing four thousand five hundred, VFR to Beatrice, requesting flight following.”

Radio calls rehearsed on the ground are far less intimidating once you are airborne with other things competing for your attention.

Flight Following and the Private Pilot ACS

The Airman Certification Standards for the private pilot certificate do not explicitly require flight following on the cross-country practical test. But designated examiners are watching how applicants interact with the entire airspace system - not just the cockpit. Using flight following demonstrates radio competency, system knowledge, and situational awareness. Examiners notice when applicants know how to work the full environment.

A Note for Student Pilots

If you have never used flight following and you are nervous about the radio call, you are allowed to tell the controller. “Departure, Cessna two seven niner, student pilot, requesting flight following, I’ll need you to go slow if you don’t mind.” Most controllers will slow down, enunciate clearly, and make sure you are keeping up. This is general aviation. The system is built to work for you.


Key Takeaways

  • VFR flight following (radar traffic advisory service) is free, workload-permitting, and available on nearly every cross-country route.
  • It provides traffic advisories and safety alerts - but it is not a separation service. See-and-avoid responsibility remains with you.
  • The initial call covers six items: facility, aircraft ID, type/equipment, position and altitude, destination, and the request.
  • Write all relevant frequencies into your nav log before departure and practice the call out loud on the ground.
  • When a sector is busy, the worst outcome is “unable” - the call is always worth making.

Radio Hangar. Aviation talk, built by pilots. Listen live | More articles