The Winds Aloft Forecast, the Product Every Student Uses Wrong, and the Altitude Selection Math That Can Save You an Hour on Your Next Cross-Country
Learn how to read the Winds and Temperatures Aloft Forecast correctly and use it to select the most efficient cruise altitude for your cross-country flights.
Two student pilots fly the same route on the same airplane on the same weather day. One lands one hour and twelve minutes after wheels-up. The other is still forty-five miles short of the destination, watching groundspeed bleed away. The difference was one pilot read the winds aloft forecast before planning the flight. The other picked an altitude at random. This guide breaks down how to read the forecast correctly, avoid the most common mistakes, and build an altitude selection process that works with the wind instead of against it.
What Is the Winds Aloft Forecast?
The official name is the Winds and Temperatures Aloft Forecast. The product identifier is FB winds. You’ll find it on Leidos standard briefings, ForeFlight, and the Aviation Weather Center website at aviationweather.gov under “winds aloft” or “FB winds.”
The National Weather Service Aviation Weather Center runs forecast models that predict wind direction, speed, and temperature at specific altitudes across the continental United States. Forecasts are computed at 6, 12, and 24-hour intervals and cover altitudes from 3,000 feet up to 39,000 feet in roughly 3,000-foot increments.
For private pilot cross-country planning, you’re working primarily with four levels: 3,000, 6,000, 9,000, and 12,000 feet.
How Do You Read the Raw Winds Aloft Data?
The forecast is organized by reporting station, each identified by a three-letter identifier (TUL for Tulsa, DEN for Denver, etc.). These aren’t always the same as airport identifiers, but they’re located near major airports and navigation points. Your EFB software will typically interpolate the forecast for your specific route, but understanding the raw format makes you a better user of those automated tools.
Below 24,000 feet, wind data appears as a four-digit group. Above 24,000 feet, a temperature component is added for a six-digit group.
Break down a four-digit group like this:
- First two digits: wind direction in tens of degrees (the direction the wind is from)
- Last two digits: wind speed in knots
So 2436 means winds from 240° at 36 knots.
What’s the Most Common Mistake Students Make Reading This Product?
Wind direction in a winds aloft forecast is given in true degrees, not magnetic. This is different from every other wind reference in aviation - ATIS, surface observations, and tower winds are all magnetic. Winds aloft forecasts are true.
If you use those numbers to calculate a wind correction angle without converting, you’ll get a wrong heading. How much it matters depends on where you’re flying. Magnetic variation in New England runs 15–16° west. In Oregon, 17–18°. Along the agonic line through the central U.S., the difference is essentially zero. On the coasts, skipping the true-to-magnetic conversion can put your heading calculation off by fifteen degrees or more.
Most EFB software handles the conversion automatically. But on the checkride, the examiner may hand you a raw winds aloft table and ask you to work by hand. The Airman Certification Standards for private pilot require you to demonstrate you can plan a cross-country using this product - the examiner wants to see you understand the data, not just an app.
What Are the Special Encoding Tricks You Need to Know?
High-wind encoding (100+ knots): A two-digit slot can’t hold a three-digit speed, so the National Weather Service uses a convention: add 50 to the direction digits and subtract 100 from the speed.
If you see 7705, the direction of 77 is impossible (wind directions max at 360). That’s your signal. Subtract 50 from 77 to get 27 (270°). Add 100 to 05 to get 105 knots. Result: winds from 270° at 105 knots - straight out of the west at jet stream strength. You won’t encounter this at 6,000 feet on a private pilot cross-country, but you need to know the convention exists.
Calm or light and variable: If the four-digit group reads 9900, the forecast is calling for wind speeds less than 5 knots. Treat it as essentially calm and don’t use it to drive altitude selection.
Why Does Temperature Aloft Matter?
Temperature affects your flight in three important ways.
Density altitude at cruise. Temperature deviation from standard drives density altitude. If the forecast temperature at 9,000 feet in a mountain state in July is 15°C warmer than standard, your aircraft is performing at a higher effective altitude than the altimeter shows - affecting true airspeed, climb rate, and engine performance. Density altitude doesn’t go away at cruise. A hot, high environment means higher power required to maintain altitude and fuel flow assumptions from the POH may not match reality.
Freezing level. If temperatures are above 0°C at 9,000 feet and below 0°C at 12,000 feet, the freezing level is somewhere in between. That’s critical for any flight in visible moisture, and even VFR flights through mountain passes where orographic lift can produce unexpected icing. Temperature aloft gives you a first-cut icing picture before you get to the AIRMET Sierra advisory.
True airspeed calculation. Indicated airspeed is what your instrument reads. True airspeed is your actual movement through the airmass. At higher, colder altitudes, true airspeed runs higher than indicated for the same power setting. Knowing your true airspeed is what lets you accurately calculate groundspeed when combined with the wind vector.
How Do You Actually Use Winds Aloft to Select an Altitude?
Your groundspeed equals your true airspeed plus the wind component along your track. Tailwind adds. Headwind subtracts. Direct crosswind has minimal groundspeed effect but does affect heading and fuel when you correct for drift.
You’re not looking for the lightest wind. You’re looking for the most favorable wind component relative to your specific route. A 30-knot tailwind beats a 20-knot headwind. A 20-knot headwind may be worse than a 40-knot quartering tailwind depending on the angle between wind direction and your track.
A practical process for every cross-country:
- Pull up the winds aloft forecast for stations along your route
- Look at 3,000, 6,000, 9,000, and 12,000 feet
- For each altitude, calculate the wind component along your planned track (E6B or EFB wind component calculator)
- Compare effective groundspeeds at each altitude
- Factor in terrain - minimum safe altitudes may resolve the choice for you
- Cross-reference with cloud layer information from METARs, TAFs, AIRMETs, and PIREPs
Even a 10–15 knot tailwind component can save 15–20 minutes on a two-hour flight - fuel saved, fatigue reduced, and a wider margin on reserves.
What Does Altitude Selection Look Like in Practice?
Consider a flight from Kansas City to Denver - roughly 600 nautical miles on a heading of about 285°, nearly due west.
The winds aloft forecast shows:
- 6,000 ft: 210° at 18 knots - south-southwest wind, slight headwind component on your 285° track
- 9,000 ft: 240° at 22 knots - southwest wind, small tailwind component along track
- 12,000 ft: 270° at 31 knots - due west, 31 knots of direct headwind
In a Cessna 172 at 110 knots true airspeed, a 31-knot headwind puts you over the ground at 79 knots. That flight got significantly longer and more expensive.
The answer is 9,000 feet - not the highest, not the lowest, but the altitude with the best wind component for this specific route and direction.
Now add terrain. Crossing into Colorado, minimum crossing altitudes for certain mountain passes may require 12,000 feet or higher depending on your exact routing. If terrain mandates 12,000 feet, you accept the headwind and build your fuel reserves around the actual groundspeed, not an optimistic one. That multi-variable thinking - winds, terrain, airspace, and cloud layers together - is exactly what the cross-country planning portion of the checkride is evaluating.
How Current Is the Winds Aloft Forecast?
The Aviation Weather Center issues new FB winds forecasts four times a day, roughly every six hours. A forecast briefed the night before for an afternoon departure may be considerably different from the updated version. Brief for your actual departure time.
More importantly: the winds aloft forecast is a forecast, not a report. PIREPs are real-time observations from pilots who have actually been at altitude in the last few hours. If multiple PIREPs along your route show winds noticeably different from the forecast, trust the PIREPs. They are ground truth.
Build the habit now of filing a PIREP after landing - even a simple one confirming conditions matched the forecast at cruise altitude. That data helps every other pilot planning a flight that day.
The Aviation Weather Center also publishes graphic winds aloft showing forecast winds as a visual overlay across the country. For long cross-countries, the graphic view reveals the big picture: where is the jet stream, where is the ridge pushing favorable winds, where is the trough creating headwinds across your route. Understanding the large-scale pattern helps you evaluate individual station numbers instead of treating them as isolated data points.
All of these tools - the FB text product, graphic winds, temperature aloft tables - are free at aviationweather.gov.
Key Takeaways
- Winds aloft direction is in true degrees, not magnetic - convert before using in heading calculations
- The four-digit encoding gives direction (first two digits × 10°) and speed in knots (last two digits); 9900 = calm; 77-series groups signal 100+ knot winds using the add-50/subtract-100 convention
- Select altitude based on the most favorable wind component along your track, not simply the lightest wind
- Always cross-reference altitude choice with terrain requirements, cloud layers, and airspace - the best wind level may not be the flyable level
- The forecast ages - brief close to departure time and verify against recent PIREPs, which are real-time observations
Radio Hangar. Aviation talk, built by pilots. Listen live | More articles