The Winds Aloft Forecast, the Encoded Four-Digit Groups Most Students Decode Without Using, and the Altitude Selection Habit That Can Make or Break a Long Cross-Country
Learn to decode and actually use the Forecast Winds and Temperatures Aloft to choose the best cruise altitude on your next cross-country flight.
The Forecast Winds and Temperatures Aloft - the FB winds product from the Aviation Weather Center - is a standard part of every official weather briefing. Most pilots decode it correctly and then ignore it when filing. The pilots who use it properly arrive faster, burn less fuel, and make smarter decisions about icing risk.
What Is the Winds Aloft Forecast and Where Do You Find It?
The product is labeled FB winds and is available through 1800wxbrief.com and aviationweather.gov as part of a standard preflight briefing.
The Aviation Weather Center publishes this product twice daily. Each issuance includes a header specifying a valid time window. That window matters more than most pilots recognize: a forecast valid for morning hours is not appropriate data for an afternoon departure. A table can still appear on your screen looking current while covering a time period that ended hours ago. Always read the header and confirm the valid period covers your planned flight time.
The product covers altitudes from 3,000 feet through 39,000 feet MSL - specifically 3,000; 6,000; 9,000; 12,000; 18,000; 24,000; 30,000; 34,000; and 39,000 feet. For most general aviation VFR flying, you’re working with the lower end of that range: 3,000 through 12,000 feet.
How Do You Decode a Winds Aloft Entry?
Each entry is a four-digit group, sometimes with a temperature value appended.
The first two digits are the wind direction in tens of degrees. Here is the critical detail most students miss: METARs report wind in magnetic degrees. Winds aloft are reported in true degrees. If you’re using a winds aloft entry to calculate a wind correction angle, you must convert from true to magnetic using the local magnetic variation. In the American West, where variation can reach 15 to 20 degrees easterly, this is not a rounding error - it’s a real navigational difference.
The second two digits are wind speed in knots. The entry 2315 means wind from 230° true at 15 knots. A full entry of 2315 −04 adds the temperature: wind from 230° true, 15 knots, temperature −4°C. Everything you need in one compact string.
What Are the Special Encoding Cases in Winds Aloft?
9900 means light and variable winds - less than 5 knots with no meaningful direction to report. A temperature value will still follow it.
When winds reach 100 knots or more, the encoding shifts: 50 is added to the direction code and 100 is subtracted from the speed. An entry starting with 73 does not mean 730°. Subtract 50 from 73 to get the actual direction code: 23, meaning 230°. Add 100 to the speed that follows to get the actual speed. This lets the four-digit format handle high-altitude jet stream speeds without an extra field. You won’t encounter this at typical GA altitudes, but a strange-looking entry makes immediate sense once you know the convention.
Above 24,000 feet, temperatures are always negative and the minus sign is dropped by convention. If you see what looks like a positive temperature at the 30,000-foot level, it is negative - the sign is assumed.
Two additional data gaps: at the 3,000-foot level, no temperature is given because surface conditions vary too much locally for the forecast to be meaningful there. And within 1,500 feet of a charted station’s elevation, no winds data is provided at all.
How Do You Choose the Best Cruise Altitude Using Winds Aloft?
This is where most pilots leave value on the table. Decoding the table is the easy part.
Consider a westbound flight from Kansas City to Denver - roughly 450 miles in a Cessna 172. A late spring afternoon winds aloft table might show:
- 6,000 ft: 260° true at 25 knots (nearly direct headwind)
- 9,000 ft: 250° true at 18 knots
- 12,000 ft: 240° true at 10 knots
The instinct is to file for 12,000 feet and take the lightest headwind. That may be the right call - but you have to run the numbers first.
True airspeed increases approximately 2% per 1,000 feet above sea level. A Cessna 172 showing about 110 knots indicated at cruise produces roughly 122 knots true at 9,000 feet and about 126 knots true at 12,000 feet. Westbound toward Denver, your heading is close to 255° magnetic. With an 18-knot headwind at 9,000 feet, ground speed works out to roughly 104 knots. At 12,000 feet with a 10-knot headwind, ground speed climbs to around 116 knots.
That 12-knot difference sounds compelling. But Kansas City sits at approximately 900 feet MSL. Climbing to 12,000 feet in a Cessna 172 at roughly 500 feet per minute takes about 22 minutes - 22 minutes at a less efficient climb power setting, burning more fuel, covering less ground per minute the whole way up. Over 450 miles, the higher altitude may still win. But you have to calculate it, not assume it.
This is precisely what the Airman Certification Standards expect from cross-country planning. The examiner doesn’t want to see a winds aloft table copied into a nav log. They want to see that it shaped a real decision - one that accounts for ground speed, climb trade-offs, fuel, and time.
How Do You Use the Temperature Column for Icing and Performance Planning?
The temperature data serves two purposes beyond filling out the format.
First, it locates your freezing level. If your winds aloft shows +2°C at 6,000 feet and −6°C at 9,000 feet, the freezing level sits somewhere in that 3,000-foot band. Flying a non-deiced aircraft through visible moisture near that layer carries well-documented consequences. Structural icing on a Cessna or Piper without deicing equipment provides little warning and few options. The temperature column is an icing avoidance tool - treat it as one.
Second, it informs density altitude planning at cruise. If forecast temperatures at your cruise altitude are warmer than standard, your aircraft’s climb performance and true airspeed for a given power setting are both reduced. Density altitude applies at every level of the atmosphere, not just at the surface, and the winds aloft temperatures give you the data to assess it before you leave the ground.
What Three Questions Should You Ask Every Time You Brief Winds Aloft?
Build these into every cross-country briefing, even short legs:
- What is my ground speed at each candidate altitude, after accounting for the true airspeed increase and the actual wind component on my heading?
- What does the temperature column tell me about freezing levels and density altitude along the route?
- Does the valid time window on this forecast cover my planned flight time?
That third question takes five seconds to answer and is the one most often skipped.
How Do You Build This Into Your Preflight Practice?
Go to 1800wxbrief.com and pull up the winds aloft table for your planned route area. Find entries for two altitudes you might realistically fly. Write down the direction, speed, and temperature for both levels. Convert the wind direction from true to magnetic for your area. Then use your E6-B or electronic flight bag to work out the actual wind correction angle and resulting ground speed at each altitude.
Then ask a real question: does the lighter headwind at the higher altitude justify the climb time and additional fuel? Or does the lower altitude get you there nearly as fast while spending less energy in the climb?
Aviationweather.gov also has a graphical winds aloft display that plots forecast winds directly on a map, altitude by altitude, with arrows and color coding. It’s useful for getting a visual sense of the wind pattern across your whole route before digging into the numbers. Use the graphical display to understand the big picture and the textual product for the actual navigation math.
Do that calculation once at your desk before a flight, and the winds aloft table stops being a form to fill out and starts being a tool that actually shapes the plan.
Key Takeaways
- Winds aloft are in true degrees, not magnetic - convert using local magnetic variation before calculating wind correction angles, especially in the American West where variation can reach 15–20°.
- Always check the valid time window in the forecast header; a table can appear current while covering a time period that has already passed.
- Calculate actual ground speed at each candidate altitude by accounting for the TAS increase with altitude and the wind component on your specific heading - never assume the highest altitude wins because the headwind number is smallest.
- The temperature column locates your freezing level and helps assess density altitude at cruise; it’s an icing avoidance tool, not filler data.
- 9900 means light and variable; entries with a direction code above 50 indicate winds of 100 knots or more encoded using the add-50/subtract-100 convention.
Radio Hangar. Aviation talk, built by pilots. Listen live | More articles