The Winds Aloft Forecast, the Coded Product Student Pilots Open and Then Close Without Reading, and the Altitude Decision That Changes Your Fuel, Your Time, and Your Margin

The winds aloft forecast can cut 20+ minutes and several gallons from a cross-country - here's how to read it and actually use it to pick an altitude.

Flight Instructor
Reviewed for accuracy by Matt Carlson (Private Pilot)

The winds and temperatures aloft forecast - referred to by pilots as FB Winds - is included in every standard weather briefing and takes under a minute to work through once you know the format. For a 250-mile cross-country, using it correctly can reduce your en route time by more than 20 minutes and meaningfully lower your fuel burn. Skipping it means choosing an altitude by habit rather than by data.

What Is the Winds and Temperatures Aloft Forecast?

The National Weather Service issues the Winds and Temperatures Aloft Forecast twice daily, with forecast periods extending to 24 hours. The low-altitude version covers 3,000 feet up to 39,000 feet. As a VFR student flying your first cross-countries in a trainer, you’re primarily working with the 6,000, 9,000, and 12,000-foot levels.

Modern planning tools - ForeFlight, Garmin Pilot, and the NOAA Aviation Weather Center website - decode the data visually, displaying wind direction arrows and speeds at each altitude level. Even so, understanding the raw format matters, because it shapes how you think about what you’re reading - and because a plain-text briefing printout at a small FBO doesn’t always give you anything fancier.

How Do You Decode the Raw Winds Aloft Code?

The raw format is a coded string, and this is where most students disengage. A string like 2815-04 contains three pieces of information:

  • The first two digits are wind direction in tens of degrees
  • The next two digits are wind speed in knots
  • The number after the sign is temperature in degrees Celsius

So 2815-04 means: wind from 280° at 15 knots, temperature -4°C at that altitude level.

There’s one quirk worth knowing before your knowledge test. When wind speeds exceed 100 knots, the encoding adds 50 to the direction digits to signal the overflow. A string like 7825 isn’t a wind from 780° - that’s not a valid compass heading. It means wind from 280° at 125 knots: subtract 50 from the direction digits, add 100 to the speed. You’re unlikely to encounter this on a training flight, but it appears regularly on the written exam.

How Does Altitude Choice Affect Groundspeed and Fuel?

The altitude you pick on a cross-country determines your groundspeed, your fuel burn per mile, and your margin when things don’t go as planned. Those three factors are connected, and they change at every altitude.

Consider a 250-mile westbound cross-country in a Cessna 172 with a cruise speed of 110 knots indicated. The winds aloft forecast shows:

  • 6,000 feet: winds from 240° at 9 knots - mild tailwind component
  • 9,000 feet: winds from 270° at 26 knots - nearly direct tailwind
  • 12,000 feet: winds from 290° at 35 knots - mostly tailwind with slight offset

With a 9-knot tailwind, groundspeed is approximately 119 knots. With a 26-knot direct tailwind at the 9,000-foot forecast level - flying the legal westbound cruising altitude of 8,500 feet - groundspeed climbs to roughly 136 knots. On a 250-mile leg, that difference changes your time en route by more than 20 minutes and reduces fuel burn per mile, since you’re covering more ground per engine hour at the same power setting.

Twenty minutes sounds like a rounding error until your fuel numbers are already a little tight, or your alternate isn’t quite where you thought it was.

What About the Return Leg?

The winds aloft forecast is a round-trip planning tool, not just an outbound check. A lot of student cross-countries are out-and-back legs where the return fuel picture matters just as much as the departure.

If that same 26-knot westerly is still set up the following afternoon, it’s now a direct headwind on your eastbound return. Defaulting to the same altitude band you flew outbound - without checking the return leg forecast - means lower groundspeed, higher fuel burn per mile, and a longer time en route. Checking the forecast for each leg separately and finding the lightest headwind among your legal eastbound altitudes (odd thousands plus 500) is a five-minute step that changes the return fuel picture significantly.

Why Does the Temperature Column Matter?

The temperature data in the forecast is what most students scroll past. It matters primarily for density altitude - the altitude your airplane is actually performing at, based on the combination of pressure altitude and temperature deviation from standard.

Standard atmosphere temperature at 9,000 feet is approximately -3°C. If the forecast shows -10°C, the air is colder than standard and your engine and wings are performing better than the chart baseline. If it shows +4°C, you’re in warmer-than-standard air and working harder for the same indicated airspeed.

For normally aspirated trainers at typical training altitudes on a mild day, the effect is modest. It becomes significant during summer months, at elevated airports, or when routing through the mountain west where field elevations sit above 5,000 feet. Strong winds aloft combined with certain temperature profiles near ridgelines can also point toward mountain wave turbulence - the forecast alone won’t diagnose it, but it’s one more layer to have in mind when terrain is a factor on your route.

How Does FAR 91.159 Constrain Your Altitude Choice?

FAR 91.159 governs VFR cruising altitudes above 3,000 feet AGL and directly limits which winds aloft levels are relevant to your planning.

  • Eastbound (magnetic course 0° through 179°): odd thousands plus 500 - 3,500, 5,500, 7,500, 9,500
  • Westbound (magnetic course 180° through 359°): even thousands plus 500 - 4,500, 6,500, 8,500, 10,500

Your altitude choices are not unlimited. The planning sequence is: identify the legal altitudes for your course direction, check the winds aloft at each of those levels, and select the best one among the options you actually have. This is exactly the kind of integrated thinking an examiner watches for - it shows you’re connecting the weather product to the regulation, not treating them as separate boxes to check off.

What Is the Right Step-by-Step Planning Process?

Here’s the sequence to work through before every cross-country:

Step 1. Work out the magnetic course for each leg. This determines which altitudes are legal under FAR 91.159.

Step 2. Pull the winds and temperatures aloft forecast for the time period closest to when you’ll actually be flying each leg.

Step 3. At each legal altitude, note the forecast wind and calculate the headwind or tailwind component relative to your course. A direct tailwind adds its full speed to groundspeed; a direct headwind subtracts it. Use your E6B for winds at an angle.

Step 4. Pick the altitude that gives the best wind advantage within the legal options, while also accounting for airspace, terrain, and any cloud layers from the TAF or area forecast.

Step 5. Run your fuel numbers at the planned groundspeed for that altitude. Confirm you have required reserves before you file.

Step 6. Write the altitude choice on your nav log and be prepared to explain the reasoning out loud.

This process adds 5 to 10 minutes to preflight planning. It’s the difference between filing a form and filing a plan.

What Does an Examiner Expect to Hear About Winds Aloft?

The Airman Certification Standards (ACS) for the private pilot cross-country task explicitly require demonstrating flight planning that accounts for winds aloft. The examiner isn’t just looking for a filled-out nav log - they want to see that you chose an altitude with intent.

An answer like “I picked 7,500 because that’s what we usually fly” is a yellow flag. The answer the examiner is looking for sounds closer to this: “I checked the winds and temperatures aloft forecast, and at 7,500 I expected approximately a 12-knot tailwind component on the outbound leg, giving me a planned groundspeed of about 122 knots. That’s the best available wind at a legal cruising altitude for my direction of flight.”

That answer demonstrates you used the product and understand what it means for the actual numbers on your nav log.

How Do You Use Winds Aloft Once You’re in the Air?

The forecast is a prediction, not a guarantee. Actual winds can differ from the forecast near active weather, frontal boundaries, or in complex terrain.

Your GPS groundspeed is your real-time check on what the atmosphere is actually doing. If you planned 120 knots and you’re tracking 104 at your first checkpoint, you have a stronger headwind than the forecast showed. Update your fuel picture immediately and decide whether you can make the destination with legal reserves, or whether a fuel stop makes more sense.

Checking actual groundspeed against planned groundspeed at every checkpoint is one of the most important habits in cross-country flying - the ACS requires you to demonstrate it in flight. Fuel exhaustion accidents share a common thread: pilots flew into stronger headwinds than forecast, didn’t compare actual groundspeed to their plan, and ran out of options before they ran out of sky. The winds aloft forecast, checked before departure and verified against GPS groundspeed in flight, is part of the planning discipline that keeps those accidents from being yours.


Key Takeaways

  • The winds and temperatures aloft forecast (FB Winds) is free, included in every standard briefing, and can change your en route time by more than 20 minutes on a 250-mile flight
  • Decode raw strings by reading direction (first two digits × 10), speed (next two digits), and temperature (number after the ± sign); if direction digits exceed 36, subtract 50 and add 100 knots to the speed
  • FAR 91.159 limits your legal altitude choices by magnetic course direction - match your winds aloft comparison to the altitudes you’re actually allowed to fly
  • Check the forecast for both legs of an out-and-back; a tailwind outbound becomes a headwind returning
  • Compare planned groundspeed to actual GPS groundspeed at every checkpoint - if the numbers diverge, update your fuel picture immediately

Radio Hangar. Aviation talk, built by pilots. Listen live | More articles