The TAF, the Terminal Aerodrome Forecast Student Pilots Read Like a Snapshot Instead of a Timeline, and the TEMPO Group That Can Make the Landing Picture Look Nothing Like the Departure

Learn to read a TAF as a timeline, not a snapshot - the TEMPO and FM change groups can describe conditions completely different from the first line.

Flight Instructor
Reviewed for accuracy by Matt Carlson (Private Pilot)

Reading only the first line of a Terminal Aerodrome Forecast is not a weather briefing. The base forecast describes conditions at the start of the valid period, but the change groups that follow - FM, BECMG, TEMPO, and PROB - describe how those conditions evolve hour by hour. Missing them is how pilots arrive at destinations forecasting ceilings below minimums that were visible in plain text the entire time.

What Is a TAF and How Long Is It Valid?

The TAF is a point forecast covering conditions within five statute miles of a named airport. It is issued four times per day at 0000, 0600, 1200, and 1800 Zulu and is valid for 24 hours at most airports, and up to 30 hours at larger facilities.

That validity window matters. Depending on when you check, you may be reading a forecast that is brand new or one that is 22 hours old and about to be superseded. The issue time and valid period are printed at the top of the product - check them every time.

Not every airport has a TAF. Coverage goes to airports with instrument approaches that meet certain traffic criteria, which covers most towered and busy reliever airports. Your small non-towered grass strip likely does not have one, and that is worth confirming before you plan around it.

How Do I Read the TAF Header?

The TAF opens with a four-letter ICAO station identifier - KDEN for Denver, KGNV for Gainesville Regional - followed by the issue time as a six-digit group showing day of month, hour, and minute in Zulu. The valid period follows as two four-digit groups separated by a slash: start day/hour and end day/hour.

After the header comes the base forecast. This is the initial picture the meteorologist expects at the beginning of the valid period. Most pilots read this line, nod, and close the tab. That is the mistake.

How Do I Decode Wind, Visibility, and Sky Condition in a TAF?

Wind is direction in degrees magnetic followed by speed in knots, with gusts appended if present. 27015G25KT means winds from 270 degrees at 15 knots, gusting to 25. Variable winds below 3 knots are designated VRB.

Visibility is in statute miles. The minimum reportable value is a quarter mile. P6 - the capital P meaning “plus” - indicates visibility greater than six statute miles. If you see a plain 6, that means exactly six. The TAF does not distinguish between 6 miles, 10 miles, and 15 miles; P6 is the ceiling of the scale. If visibility is forecast below six statute miles, the TAF is required to explain why with a weather phenomenon code.

Sky condition uses the same designators as a METAR. SKC is sky clear. FEW is one to two oktas. SCT is scattered. BKN is broken. OVC is overcast. Heights are in hundreds of feet above ground level - OVC008 is overcast at 800 feet, which is IFR territory. When a cloud layer carries a CB (cumulonimbus) or TCU (towering cumulus) tag, that is not background texture. FEW030CB means few clouds at 3,000 feet and they are cumulonimbus.

What Weather Codes Do I Need to Know?

The two-letter weather phenomenon codes are where many students glaze over - which is a mistake, since they are the reason a visibility figure drops below six miles.

Common codes: RA is rain, SN is snow, BR is mist, FG is fog, DZ is drizzle, TS is thunderstorm. They combine - TSRA means thunderstorms with rain. The prefix FZ means freezing - FZFG is freezing fog, which means ice on the airframe from the moment you open the hangar door.

The pairing that trips up students most often is BR versus FG. Both are suspended water particles and both look similar from the cockpit. The difference is numeric: mist (BR) is visibility between five-eighths and six miles; fog (FG) is visibility below five-eighths. Same gray sky, very different numbers on the gauge.

What Are the Four TAF Change Groups?

After the base forecast, change groups describe how conditions evolve across the valid period. There are four types. Reading only the base forecast and skipping these is where dangerous misreads happen.

FM (From) is a permanent, persistent change. When an FM group appears, the entire previous forecast is replaced - sky condition, visibility, weather, winds. Those conditions persist until the next change group. FM111210 means from the 11th day of the month at 1210 Zulu, conditions change completely. This is the most common TAF misread in training: a student reads clear skies in the base forecast and misses the FM group that takes the ceiling to broken at 400 feet in rain two hours before their arrival.

BECMG (Becoming) describes a gradual transition between two time points. BECMG 1112/1114 means the change is expected to complete somewhere between 1200 and 1400 Zulu on the 11th. Like FM, the result is a lasting change - but BECMG describes a slope, not a step.

TEMPO means temporary. Specifically, conditions lasting less than one hour per occurrence and occurring for less than half of the indicated period. TEMPO does not replace the base forecast; it overlays it. The base conditions remain the expected norm, and the TEMPO group describes what the sky can temporarily look like within that window before reverting.

PROB (Probability) appears as either PROB30 or PROB40, representing 30 and 40 percent probability that specified conditions will occur. You will not see PROB50 or higher in a TAF - if conditions have a 50 percent or greater probability, they belong in the base forecast or a change group. PROB40 carries more weight than PROB30. PROB groups can combine with TEMPO - PROB40 TEMPO - meaning a 40 percent chance of temporary conditions matching that group during the window.

Why Does the TEMPO Group Matter So Much?

If a TEMPO group covers your arrival window and lists ceilings and visibility below your minimums, you have a real decision to make before you ever start the engine.

Say the destination base forecast is clear with visibility 10. But there is a TEMPO covering your arrival window reading: visibility one and a quarter in heavy rain and thunderstorms, ceiling overcast 200 feet. Those are well below IFR minimums for most approaches.

The question is not whether conditions will definitely reach that point. The question is whether you have a plan if they do - an alternate airport, sufficient fuel to hold or reroute, and certification appropriate to the approach. When you sit across from an examiner on a cross-country planning task, they are watching whether you found the TEMPO group and whether you thought through what it means for your arrival.

How Do I Read a TAF as a Timeline?

On your next preflight, pull up the destination TAF and read it as a timeline rather than a snapshot. Write out the time blocks if it helps.

  1. What are the base conditions from the start of the valid period to the first change group?
  2. What changes at the first FM or BECMG, and when does that change take effect?
  3. Are there any TEMPO groups, and do any of them overlap your arrival window?
  4. Are there any PROB groups flagging low-probability scenarios worth noting?

Walk that timeline against your planned arrival time - not your departure time. The base forecast at 0600 Zulu might look fine, but the FM group at 1300 Zulu is what matters if you are landing at 1400.

Most electronic flight bag applications, including ForeFlight, display a visual timeline view of the TAF. These tools are genuinely useful, but the goal is to understand the underlying data before the app renders it graphically - so you are interpreting the forecast rather than glancing at a colored bar.

What Else Should I Check in a TAF Before Flight?

Look at the header for the amendment flag. TAF AMD means an amendment has been issued - the original forecast changed because the meteorologist saw something unexpected in the atmosphere and updated the product. That flag tells you the initial picture did not hold up. Note whether the amendment moved conditions toward better or worse.

The TAF does not stand alone in a full standard weather briefing. When you call Leidos Flight Service at 1-800-WX-BRIEF and request a standard briefing, the briefer works through adverse conditions, synopsis, en route forecast, destination area forecast, winds aloft, NOTAMs, and the destination TAF in sequence. The TAF is the most granular and time-specific piece of that picture. The Area Forecast Discussion gives you the confidence language behind the numbers. Winds aloft tell you what the atmosphere is doing above the surface. Together they build a complete picture.

If you have not done a full standard verbal briefing before your checkride, do it once. An actual phone call with an actual briefer, not just the app. When the weather is close to your limits, that conversation is worth more than any screen session.

The reference document for TAF structure and decoding is the FAA’s Aviation Weather Handbook, Advisory Circular 00-6-45. The NWS Aviation Weather Center also publishes decoded and explained versions of TAFs that are worth bookmarking while you are building fluency with the raw format.

Your personal minimums should be higher than the legal floor - worth stating plainly. The legal VFR minimums in some airspace are low enough to put experienced pilots in conditions they plan carefully for. While you are still building the experience bank, write down your personal minimums and hold to them even when the TAF says technically legal.

The TAF told you what the weather would do. The only question is whether you read the whole thing.


Key Takeaways

  • The TAF base forecast describes only the opening conditions; FM, BECMG, TEMPO, and PROB change groups describe the full timeline.
  • FM is a complete, persistent replacement of conditions. Missing an FM group is the most common TAF misread in training.
  • TEMPO overlays the base forecast - it describes temporary deviations that can flip the weather picture during your arrival window.
  • If a TEMPO or PROB group covers your arrival time and lists conditions below your minimums, have an alternate plan before engine start.
  • Always check the issue time and valid period; if your arrival falls after the current TAF expires, the next issuance may not be published yet.

Radio Hangar. Aviation talk, built by pilots. Listen live | More articles