The PIREP, the Pilot Report That Exists Only When Someone Files It, and the Real-Time Data Most Students Learn to Decode and Never Learn to Use

PIREPs are the only real-time atmospheric data in your weather briefing - here's how to read, find, and file them effectively.

Flight Instructor
Reviewed for accuracy by Matt Carlson (Private Pilot)

A PIREP (Pilot Report) is a first-person weather observation filed by a pilot in flight, describing what they actually found in the air at a specific location, altitude, and time. Unlike every other product in your weather briefing, a PIREP is not a model, forecast, or surface observation - it is ground truth from the atmosphere you are about to fly through. That distinction makes PIREPs one of the most actionable tools in preflight planning, and one of the most underused.

What Makes PIREPs Different from Other Weather Data?

Your standard weather briefing includes terminal aerodrome forecasts (TAFs), METARs, AIRMETs, prog charts, and winds aloft - all of which are either surface-level observations or model-based predictions. They are valuable, but they are predictions.

PIREPs are different. When a pilot reports moderate turbulence at 7,000 feet between two navigation fixes, that is what the air was doing in that corridor at that altitude at that time. No forecast model generated that report. A pilot found it.

PIREPs typically remain active in the aviation weather system for approximately 90 minutes, though some platforms retain them longer. Always check the timestamp before relying on a report.

How Do You Read a PIREP?

PIREPs are encoded using slash-delimited fields, each preceded by a two-letter identifier. The structure is consistent once you recognize the logic:

  • /OV - Location (navigation fix or bearing/distance from a known point)
  • /TM - Time (Zulu)
  • /FL - Altitude or flight level
  • /TP - Aircraft type
  • /SK - Sky cover
  • /WX - Weather and visibility
  • /TA - Air temperature (Celsius)
  • /WV - Winds
  • /TB - Turbulence
  • /IC - Icing
  • /RM - Remarks

Not every field appears in every PIREP. Pilots report what they encountered, so a report may contain only a subset of these fields.

Routine PIREPs are coded UA. Urgent PIREPs are coded UUA. An urgent PIREP indicates the filing pilot encountered conditions serious enough to warrant immediate, priority distribution throughout the aviation weather system - severe turbulence, severe icing, or microburst activity. Treat a UUA with the same weight as a SIGMET.

How Do You Decode a Real PIREP?

Here is a sample report you might encounter in a preflight briefing:

UA /OV MGW-CRW /TM 1730 /FL070 /TP C172 /TB LGT-MOD /IC NEG

Decoded: Routine PIREP. Location between Morgantown and Charleston, West Virginia. Time 1730 Zulu. Altitude 7,000 feet. Aircraft type Cessna 172. Turbulence light to moderate. Icing negative.

That is specific and directly actionable. A Cessna 172 found light to moderate turbulence at 7,000 feet in that mountain corridor. If you are flying the same route in a similar aircraft, you now know what conditions to expect at that altitude - and you can plan accordingly.

Why Does Aircraft Type Matter When Reading a PIREP?

The /TP field is not administrative data. It is essential context for interpreting what the conditions actually felt like.

A Boeing 737 reporting light chop at cruise altitude is an entirely different picture from a Piper Cherokee reporting light turbulence at 7,000 feet. Large, heavy, transport-category aircraft ride through conditions that would feel significantly worse in a small piston single. When you are flying a Cessna or a Piper, pay close attention to PIREPs filed by aircraft in a similar weight class. Reports from jets and turboprops are still worth reading, but mentally adjust upward when translating their experience to your airplane.

What Do the Turbulence Intensity Codes Mean?

The turbulence scale runs from negative through extreme, and the distinctions matter:

  • Negative - Smooth, no turbulence
  • Light - Slight, erratic changes in attitude and altitude; passengers may feel mild seatbelt strain
  • Light to Moderate - A meaningful step up; plan for it
  • Moderate - Rapid changes in altitude and attitude; occupants feel definite strain against seatbelts; unsecured objects become dislodged. In a light aircraft, this is a significant event.
  • Moderate to Severe / Severe - Aircraft control is a struggle
  • Extreme - Violent, with potential for structural damage (rare but real)

A common mistake is dismissing light turbulence as insignificant. The codes describe atmospheric conditions - how those conditions affect your specific flight depends on your aircraft, your passengers, the stage of your flight, and your plan. Light turbulence in a Cessna 172 with a first-time passenger is a very different operational reality than the same report would be for an experienced solo pilot.

How Do You Interpret Icing PIREPs?

Icing intensity runs from negative through trace, light, light-to-moderate, moderate, and severe. The reported type adds important detail:

  • Rime ice forms from small supercooled droplets that freeze on contact, building a rough, opaque layer on leading edges
  • Clear ice (glaze ice) forms from larger droplets that run back along the airframe surface before freezing - denser, harder to see, and potentially faster-accumulating than rime
  • Mixed is a combination of both

The critical thing with icing PIREPs: they are time-stamped and altitude-specific. The freezing level changes throughout the day. A report of light rime icing at 10,000 feet filed two hours ago may not describe current conditions at all if the temperature or airmass has shifted. Use icing PIREPs as one input in your planning picture, not the final word.

If your aircraft is not certified for flight into known icing conditions, any icing PIREP along your route is a planning signal. Someone found ice there. You need a contingency before departure.

What Are Cloud Tops PIREPs and Why Do They Matter for Instrument Flying?

When a pilot climbs through an overcast layer and breaks out on top, they often note the altitude at which they exited the clouds. That becomes a cloud tops PIREP - and it is one of the most valuable, least-discussed entries in the system.

Your TAF tells you what the ceiling is expected to be at your destination. It does not tell you where the tops of that layer are. If you are planning an instrument approach into an airport sitting under a 2,000-foot overcast, the difference between tops at 4,000 feet and tops at 18,000 feet is the difference between viable options and no options at all for an unpressurized piston single.

On overcast instrument days, explicitly look for PIREPs that report smooth, clear conditions above a specified altitude with an overcast layer below. That pilot is giving you the vertical picture of the entire cloud deck.

Where Do You Find PIREPs in Your Briefing?

ForeFlight displays PIREPs as circular icons on the map. Tapping one shows the full decoded report including aircraft type, altitude, conditions, and timestamp. Use the altitude filter - a PIREP at FL240 is largely irrelevant to a flight at 4,500 feet unless it involves icing in an area you will fly beneath. Narrow the picture to your altitude band.

1800wxbrief.com / Flight Service (1-800-WX-BRIEF) includes relevant PIREPs automatically in a standard briefing. You can also ask the specialist to focus on PIREPs for a particular route segment if you want more detail on a specific area.

aviationweather.gov has a dedicated PIREP page where you can search by area, altitude, and time window. It displays both the raw encoded format and a plain-language decoded version side by side.

Across all platforms: check the timestamp first. A report older than 90 minutes should be treated with real caution.

What Does It Mean When There Are No PIREPs on Your Route?

No PIREPs does not mean good conditions. It means an absence of information.

The route may have been quiet and nobody bothered to file. Or nobody has flown that corridor in the last several hours. The difference matters enormously. When PIREPs are sparse, lean harder on the rest of your briefing picture: What do the AIRMETs say? Is there an AIRMET Tango calling for moderate turbulence? An AIRMET Sierra for mountain obscuration? What do the winds aloft suggest about mechanical turbulence over ridgelines? What time of day is it and what is the terrain you are crossing?

Afternoon thermals over flat terrain on a hot summer day are essentially guaranteed with or without a PIREP confirming it. PIREPs fill the gap between forecast and reality. When there are none, you are filling that gap with inference and experience. Build your decisions accordingly.

Can You Request PIREPs from ATC While in Flight?

Yes - and this resource is frequently overlooked. When you are en route and conditions start to change, ask Center or Approach if they have any recent pilot weather reports for the area ahead. Controllers are connected to the weather distribution system and can relay what other pilots have reported in the past hour along your route.

Calling Center and asking for recent pilot reports is completely standard. Most of the time, they will have something for you - or they will tell you nothing is on file. Either answer is useful information.

Controllers will also sometimes ask you to file a PIREP, particularly if you are flying in instrument conditions or if you encounter turbulence or icing significant enough that they want to pass that information to other aircraft. When a controller asks you to file, that is the system working as intended. File it.

When and How Should You File a PIREP?

No FAR requires you to file a PIREP after every flight. But the system only works when pilots contribute to it. A pilot who hits moderate turbulence over a mountain ridge and says nothing has withheld real information from every pilot who follows on that route.

File when you encounter significant conditions. File also when you get to cruise altitude and find smooth, clear air after an uncertain forecast. A negative PIREP - confirming the air was smooth when the forecast had been ambiguous - tells the next pilot that conditions have improved. That is valuable data.

Filing in flight is straightforward:

  1. If you are with a facility, advise the controller you have a PIREP to file
  2. Provide your location, altitude, aircraft type, and what you encountered
  3. The controller will take it from there

If you are not with a facility, file through Flight Service on 122.2 or directly through ForeFlight.

The Airman Certification Standards (ACS) for the private pilot certificate expect you to understand PIREPs, decode them, and know how to file one. Your examiner may ask about it in the oral. More importantly, the pilots who fly your route after you are depending on you to do it.


Key Takeaways

  • PIREPs are the only real-time atmospheric data in your briefing - everything else is a surface observation or a forecast
  • Aircraft type context is essential: reports from jets and turboprops describe conditions that feel worse in light piston aircraft; weight-match your sources when possible
  • No PIREPs on your route is not a clearance - it is an absence of information that requires harder reliance on AIRMETs, winds aloft, and terrain analysis
  • PIREPs age out around 90 minutes - always check the timestamp before treating a report as current
  • File your own PIREPs - both significant encounters and smooth conditions; the system depends on pilot participation to function

Radio Hangar. Aviation talk, built by pilots. Listen live | More articles