The PAPI and VASI, the Visual Glidepath Tools Most Students Glance at Once on Short Final, and the Three-Degree Discipline That Keeps You Clear of Everything Short of the Runway

Learn to use the PAPI and VASI as continuous glidepath feedback tools, not one-time sanity checks, for more precise and safer approaches.

Flight Instructor
Reviewed for accuracy by Matt Carlson (Private Pilot)

The PAPI (Precision Approach Path Indicator) and VASI (Visual Approach Slope Indicator) are among the most underutilized tools in a student pilot’s scan. Most pilots learn the color combinations early in training, pass the written test, and then revert to a single glance at short final. Used correctly, these systems provide continuous glidepath feedback from several miles out all the way to the threshold.

What Are the PAPI and VASI Actually Doing?

Both systems project beams of light down the approach path at a specific angle. At most airports, that angle is three degrees. Some airports with obstacles near the approach end use steeper settings, but three degrees is standard. The light units sit alongside the runway in the touchdown zone area, offset from the runway edge, angled to show your geometric position relative to that ideal glidepath.

How Do You Read a PAPI?

The PAPI is a single row of four lights, read left to right:

  • Four red - significantly below glidepath
  • Three red, one white - below glidepath
  • Two red, two white - on glidepath
  • One red, three white - above glidepath
  • Four white - significantly above glidepath

The common mnemonic is “all red, you’re dead.” It’s blunt, but it’s correct. Four reds on final means add power immediately.

How Do You Read a Two-Bar VASI?

The two-bar VASI uses a near bar and a far bar, read together:

  • Both red - below glidepath
  • Near bar white, far bar red - on glidepath (“white over red, you’re ahead”)
  • Both white - above glidepath

The color combinations are simple. The challenge is using the system the way it was designed to be used.

Why Are Pilots Using These Tools Wrong?

The most common mistake is treating the PAPI as a sanity check rather than a feedback loop. A student learns the colors, turns final, glances at the PAPI at a half mile to confirm they’re roughly on track, and moves on. That’s not using the PAPI - that’s confirming the approach is almost over without learning anything from it.

On a clear day, the PAPI is visible from three to four miles out on final. That means it’s giving you usable information from the moment you roll out on centerline, all the way to the threshold.

What Does a Well-Flown Approach Look Like on the PAPI?

Immediately after turning final at pattern altitude, you may see four whites. That’s expected - you haven’t started your descent yet and you’re above the extended glidepath. As you configure the aircraft, reduce power, and begin descending, watch the PAPI transition: three whites and a red, then two whites and two reds.

When you reach two red and two white, you’ve captured the glidepath. Hold your power setting and descent rate.

From that point to the threshold, the target is two-two.

How Do You Make PAPI Corrections Without Destabilizing the Approach?

If the PAPI drifts toward three reds and one white, you’re going below glidepath. Add power - a small addition, not a dramatic pull-up. Let the descent rate decrease and watch it come back to two-two.

If it drifts toward one red and three whites, you’re going above. Reduce power slightly, let the nose come down, watch it return to two-two.

The principle is small corrections made early. A pilot checking the PAPI once can only make large, late corrections. A pilot scanning it continuously makes tiny adjustments that are invisible to anyone in the cabin.

What Do the ACS Standards Require?

The Airman Certification Standards require you to maintain the proper glidepath and touch down in the designated touchdown zone. The PAPI is the most direct real-time feedback available for the glidepath portion of that standard. Continuous use of the PAPI is not extra credit - it is the technique the standard is testing.

Does the PAPI Tell You About Airspeed?

No. The PAPI is only measuring your geometric position relative to the glidepath angle. You can be right on two-two and be significantly fast or dangerously slow. The PAPI is one instrument in a scan that must also include airspeed, descent rate, and centerline. It gives you one piece of information, and it gives you that piece clearly - but it is one piece.

How Does Night Flying Change How You Should Use the PAPI?

At night, visual depth perception degrades significantly. The horizon may be invisible. Hillside lights beyond the airport can make you feel higher than you are; dark terrain or water on the approach path creates the same illusion. This is the black hole approach environment - you’re flying over darkness aiming for threshold lights, with nothing to anchor your perception of height or angle. Pilots in these conditions tend to descend too early and too steeply.

At night, trust the PAPI more, not less. If your visual picture suggests a normal approach but the PAPI shows three reds, trust the PAPI. The visual picture at night is unreliable. The PAPI is geometry. It does not lie about where you are relative to the glidepath.

What Does a Displaced Threshold Mean for PAPI Guidance?

If a runway has a displaced threshold - where the legal landing threshold is set back from the physical beginning of the pavement - the PAPI is calibrated to that displaced threshold. The system is protecting you from whatever obstacle or hazard caused the displacement.

If you aim for the physical beginning of the runway and ignore the displaced threshold, the PAPI may not protect you from what lies between your flight path and the actual threshold. Before flying an unfamiliar runway, check the chart supplement and know whether the threshold is displaced.

Where Do You Find PAPI Glidepath Angles and Non-Standard Configurations?

PAPI and VASI glidepath angles, threshold crossing heights, and any non-standard configurations are published in the airport’s chart supplement, available in your electronic flight bag. For your home airport, this is worth looking up once so you know exactly what you’re working with.

PAPI and VASI specifications are documented in FAA Aeronautical Information Manual, Chapter 2.

What’s the Right Habit to Build Starting on Your Next Approach?

Before turning final, make a deliberate mental statement: “I’m expecting a standard three-degree PAPI at this runway. I want to see two-two from final all the way to the threshold.” When what you see doesn’t match that expectation - three reds instead of two-two at two miles out - that discrepancy demands an immediate response. That’s the discipline.

When Should You Go Around Instead of Correcting?

If you get distracted on final - a frequency change, a flap reconfiguration, a question from the right seat - and you look up at three-quarters of a mile to find three reds, the correction required may be too large and the remaining runway too short to safely absorb a low, unstabilized approach. Go around.

No examiner has ever failed a student for going around from a bad approach. They have failed students for continuing bad approaches to bad landings. The go-around is always available. Use it.

Does This Discipline Apply at Airports Without PAPI or VASI?

Yes. The glidepath discipline transfers even when the lights aren’t there. Without a PAPI or VASI, the reference cues shift to the runway’s aspect ratio, the sight picture over the nose, and the rate at which the threshold moves in the windscreen. Those cues take longer to build, but the habit of continuously monitoring your glidepath is identical. Learning the PAPI teaches the discipline. The discipline carries over.


Key Takeaways

  • The PAPI and VASI are continuous feedback tools, not one-time checks - scan them from the moment you roll out on final until the threshold.
  • Two red, two white is the on-glidepath indication for the PAPI; white over red is on-glidepath for the two-bar VASI.
  • Make small corrections early; waiting for large deviations produces large, late corrections that destabilize the approach.
  • At night, in black hole environments, the PAPI is more reliable than your visual picture - trust it.
  • If a displaced threshold exists, the PAPI is calibrated to it; check the chart supplement before flying an unfamiliar runway.

Radio Hangar. Aviation talk, built by pilots. Listen live | More articles