The METAR, the Aviation Routine Weather Report Student Pilots Scan Without Reading, and the Remarks Section That Tells the Story the Body Leaves Out
Decode every part of a METAR - from station identifier to the remarks section most student pilots skip - to build a complete weather picture before every flight.
The METAR is the most current, most reliable weather product in a standard preflight briefing. It is not a forecast or a projection - it is a report of observed conditions at a specific airport, recorded within the last hour. Every pilot who can read one fluently arrives at the runway with a clear mental picture of what to expect.
What Is a METAR and How Is It Different From a Forecast?
METAR stands for Aviation Routine Weather Report. Standard METARs are issued once per hour, at 55 minutes past, with some busier airports reporting every 30 minutes. Any METAR older than one hour should be treated as background context, not current conditions.
If the report begins with SPECI instead of METAR, that signals a special observation issued outside the normal schedule. Something significant changed - visibility dropped, wind shifted, or a thunderstorm moved in. A SPECI warrants immediate attention.
How Do I Read the METAR Header: Station, Date, and Time?
The four-letter identifier following METAR is the reporting station. All domestic U.S. airports begin with K - KGSO, for example, is Piedmont Triad International in Greensboro, North Carolina. Canadian airports begin with C. That identifier is your first orientation point, especially when flying across borders.
The date-time group follows. In 151555Z, the first two digits (15) are the day of the month, and the last four (1555) are the observation time in Coordinated Universal Time (UTC) - what pilots call Zulu. Zulu is never local and is never adjusted for daylight saving time.
Applying the UTC offset incorrectly is a common student error. A METAR that appears current in local time can be 90 minutes old when the offset is applied properly. Always convert Zulu before making any decisions about how fresh an observation is.
What Does AUTO Mean in a METAR?
AUTO means the data was collected by an Automated Surface Observing System (ASOS) with no human observer. This is the standard at most smaller airports. The sensor measures conditions at that precise point on the field and reports exactly what it detects - nothing more.
Automated stations have real limitations. They can miss cumulonimbus development if the cloud base is high enough that the ceilometer doesn’t flag it. They cannot report lightning. A cell building 15 miles to the south will not appear in an ASOS METAR. An automated observation is one piece of the weather picture, not the whole thing.
If the report shows COR (corrected) or carries no modifier at all, human eyes were part of the observation. That meaningfully increases the reliability of the sky condition report.
How Do I Read Wind in a METAR?
Wind is reported as direction and speed: 27012KT means wind from 270 degrees (due west) at 12 knots. If the direction is varying significantly, you’ll see a range appended: 250V310 means the wind direction is fluctuating between 250 and 310 degrees - a 60-degree spread. Variable winds require extra attention when planning your runway.
One detail most students miss: wind direction in a METAR is in degrees true, not magnetic. Runway headings are magnetic. At most domestic airports the difference is small, but in Alaska, northern Canada, or high-latitude areas with significant magnetic variation, the gap can affect crosswind calculations meaningfully.
For the Private Pilot ACS, know how to calculate the crosswind component from a METAR wind. If the METAR reads 270 at 12 and you’re landing on Runway 32, that is not a straight-in headwind - brief the angle before you go.
What Does METAR Visibility Actually Mean?
Visibility in a U.S. METAR is reported in statute miles, not nautical. 10SM is ten statute miles. 1/2SM is half a statute mile. The prefix M means “less than” - M1/4SM means visibility is below one-quarter statute mile. Under VFR, any M prefix is a no-go.
METAR visibility is prevailing visibility - the greatest distance observable throughout at least half of the horizon circle. It is not the minimum in every direction. You can have 10 miles prevailing with a wall of fog in one quadrant, and the main METAR body may not call it out. That’s one reason the remarks section exists.
What Do Present Weather Codes Mean?
Present weather phenomena appear after visibility. These are the standard abbreviations:
- RA - rain
- SN - snow
- FG - fog
- TS - thunderstorm
- BR - mist
- HZ - haze
- GR - hail
- FZRA - freezing rain
Intensity modifiers: a minus sign (−) means light; a plus sign (+) means heavy. −RA is light rain. +TSRA is heavy thunderstorm with rain.
FZRA anywhere in a METAR ends your planning for that airport. That environment contains known icing. Without certification and equipment for known icing, that airport is not an option.
How Do I Find the Ceiling in a METAR?
Sky condition layers use these abbreviations, based on eighths of sky coverage:
- FEW - 1–2 eighths
- SCT (Scattered) - 3–4 eighths
- BKN (Broken) - 5–7 eighths
- OVC (Overcast) - 8 eighths
- VV (Vertical Visibility) - sky obscured; sensor cannot determine cloud heights
The number following each code is in hundreds of feet AGL. OVC048 is overcast at 4,800 feet above ground level - not above sea level.
The ceiling is the lowest broken or overcast layer. FEW and SCT are clouds, but they do not define a ceiling. With SCT020 BKN050, the ceiling is 5,000 feet, not 2,000. With FEW020 OVC100, the ceiling is 10,000 feet, not 2,000. The Private Pilot ACS specifically tests this. The examiner will ask you to identify the ceiling from a METAR - know it cold.
One METAR can report up to three sky condition layers, listed in ascending order. Find the first BKN or OVC - that is your ceiling.
VV000 means the sensor cannot determine any ceiling at all. That is not a situation to arrive into unprepared.
What Does the Temperature/Dewpoint Spread Tell Me?
Temperature and dewpoint are reported in degrees Celsius, separated by a slash. 15/08 means temperature 15°C, dewpoint 8°C, spread 7 degrees.
The spread is a fog and low stratus indicator. For roughly every 2.5°C drop in temperature, the spread closes by approximately 1 degree. When temperature and dewpoint are within 2–3 degrees of each other, fog formation becomes likely - especially in the evening as temperatures fall. A tight spread at your destination, trending toward sunset, is a flag worth taking seriously before launch.
What Is Runway Visual Range, and When Does It Matter?
Runway Visual Range (RVR) appears after visibility when reported. The format is R, then the runway designator, then visibility in feet: R28R/2400FT means the visibility at the threshold of Runway 28 Right is 2,400 feet.
RVR is measured by a transmissometer at the runway threshold and is the most precise visibility measurement available for an approach. When flying an instrument approach to minimums, RVR is what determines whether the approach is legal to shoot.
How Do I Set the Altimeter From a METAR?
The altimeter setting appears as a four-digit number preceded by A: A2998 means set your Kollsman window to 29.98 inches of mercury. This ensures your altimeter reads field elevation when on the ground at that station.
An altimeter setting error of 0.1 inch translates to approximately 100 feet of altitude error. In instrument meteorological conditions (IMC) and on instrument approaches to minimums, that matters.
What Is in the METAR Remarks Section?
The remarks section begins with RMK and is what most student pilots skip. It is the part worth reading carefully.
AO1 vs. AO2 tells you whether the automated station has a precipitation discriminator. An AO2 station can distinguish rain from snow. An AO1 station cannot - in marginal winter conditions, it cannot definitively identify whether precipitation is rain or freezing rain. That distinction can be the difference between a normal approach and an emergency.
Sea level pressure (e.g., SLP143) is pressure in millibars with the leading digits assumed. SLP143 = 1014.3 mb. This is useful for reading pressure gradients on a surface analysis chart.
PRESRR and PRESFR are significant markers. Pressure Rising Rapidly typically signals a cold frontal passage or a tightening system. Pressure Falling Rapidly indicates an approaching low. Either of these at your destination warrants investigation before launching.
The temperature remark (e.g., T01500083) gives temperature and dewpoint to the tenth of a degree. The digit after T is the sign: 0 = positive, 1 = negative. T01500083 = temperature +15.0°C, dewpoint +8.3°C. T11010092 = −10.1°C and −9.2°C - a potential icing scenario on approach.
WSHFT followed by a Zulu time means a wind shift occurred. If you departed into a headwind and the METAR shows a shift since the observation, your landing may be in crosswind or tailwind conditions. Plan for it.
PK WND is peak wind. PK WND 320/28 2130 means a peak gust of 28 knots from 320° occurred at 2130 Zulu. The METAR may show calm winds now, but the peak wind reveals recent significant gusts. That matters for runway selection.
TSNO means thunderstorm equipment is not available. Some automated stations have no lightning sensors. With TSNO in the remarks, that station will not detect a developing thunderstorm even if one is nearby. Cross-reference with radar, PIREPs, and prog charts.
A dollar sign ($) at the end of remarks means the station is flagging a maintenance need. The sensor may not be calibrated correctly. Treat that data with added skepticism and cross-reference with a nearby station when possible.
What Is the Fastest Way to Read a METAR Before a Flight?
Build a consistent scan sequence. Once practiced, this takes under 60 seconds:
- Identifier and time - Is this observation current?
- AUTO - Human observer, or automated only?
- Wind - Direction, speed, gusts, variable range. What is the crosswind component on the expected runway?
- Visibility - At or above VFR minimums? Any M prefix?
- Weather phenomena - Any precipitation? Freezing rain? Fog?
- Sky condition - Find the ceiling. Find the lowest BKN or OVC.
- Temperature/dewpoint - What is the spread?
- Altimeter - Set it.
- Remarks - AO1 or AO2? PRESRR or PRESFR? Wind shift? Peak wind? TSNO? Dollar sign?
The first twenty times through this sequence, budget five minutes. After a hundred repetitions, it’s automatic.
How Do the METAR and TAF Work Together?
The METAR is a snapshot - what was true at that field at a specific moment. The Terminal Aerodrome Forecast (TAF) tells you what is coming. The Graphical Forecasts for Aviation fill in hazards across the route. But the METAR is the anchor - everything else is a projection.
Pull the destination METAR first, before the TAF. If the destination is currently 400 overcast and a quarter mile in fog, the TAF needs to show a significant and credible improvement - and you need a contingency plan if that improvement doesn’t materialize.
When the METAR and TAF tell different stories, that disagreement is itself a flag. Resolve it by pulling additional products, calling Flight Service, or talking to a CFI. The METAR is the most honest voice in the briefing room.
Key Takeaways
- The ceiling is the lowest broken (BKN) or overcast (OVC) layer - FEW and SCT are clouds, not ceilings.
- Wind direction in a METAR is in degrees true, not magnetic - runway headings are magnetic.
- METAR visibility is prevailing, not minimum in every direction - the remarks section may carry the detail the main body omits.
- FZRA anywhere in a METAR is a no-go for pilots without known icing certification and equipment.
- The remarks section contains critical operational data - AO type, pressure trends, wind shifts, peak winds, and sensor status - that most student pilots skip.
Radio Hangar. Aviation talk, built by pilots. Listen live | More articles