The FAA Updates Part Twenty-Three and What New Certification Standards Mean for the Light Aircraft Coming to Your Ramp
The FAA has accepted updated Part 23 certification standards covering stall behavior, structures, and electrical systems - with direct implications for every new aircraft entering the fleet.
The FAA has formally accepted a new round of updated standards under Part 23, the certification framework governing light aircraft in the United States. The revisions address stall behavior, airframe structures, and electrical systems - the foundational requirements that determine what an aircraft must demonstrate before receiving a type certificate. For pilots evaluating new purchases, flying composite designs, or watching the electric aircraft pipeline, these updates establish a more current safety baseline than legacy certification rules.
What Part 23 Is and Why It Was Rewritten
Part 23 is the federal rulebook that governs certification of small aircraft in the United States. For decades, it was prescriptive - manufacturers followed a specific recipe of tests and methods, all written for aluminum airframes with analog instruments. As composite structures, glass cockpits, fly-by-wire controls, and electric propulsion entered the market, the old recipe had no chapter for what engineers were actually building.
In 2017, the FAA rewrote Part 23 from the ground up. The new framework shifted from prescribing exactly how to build an airplane to defining the safety outcomes a design must achieve. The technical details - specific test methods and means of compliance - were handed to ASTM International, which develops those standards through its F44 Committee on General Aviation Aircraft. That committee includes manufacturers, test pilots, engineers, and FAA technical staff.
This was the most significant change to light aircraft certification in a generation. The recently accepted updates are a continuation of that work - the living document evolving as it was designed to.
What Changed: Stall Behavior
Stall behavior is personal to every pilot. How an aircraft stalls, and more critically how it recovers, is one of the most fundamental safety characteristics of any design.
Modern light aircraft present challenges the original standards didn’t anticipate. Designs now incorporate sophisticated angle-of-attack indicators as standard equipment. Wing washout and leading-edge geometry are deliberately engineered to manage stall progression in ways that weren’t common when the original rules were written. Electric and hybrid designs carry different weight distributions that affect stall characteristics in ways legacy standards never addressed.
Aircraft coming through certification under the updated stall standards will be evaluated against criteria that reflect what modern designers are actually building. For the pilot, a fresh type certificate now carries a defensible, current standard for how that aircraft behaves at the edge of the envelope.
Benign, recoverable stalls are not accidents waiting to happen. Stalls that snap a wing down without warning - or that demand precise technique to recover from at altitude - become statistics. Certification standards are the first line of defense against putting an aircraft in front of pilots that cannot tolerate a moment of inattention.
What Changed: Airframe Structures
Structural standards under Part 23 govern load limits, fatigue behavior, and how the airframe holds up across its entire service life. Modern materials have made this considerably more complex.
Carbon fiber composites do not behave like aluminum under fatigue - they fail differently. An airframe can carry its certified load factor with no visible surface damage while internal delamination quietly builds toward a structural event that provides no warning. Updated structural standards address how modern materials and construction methods actually perform, not how aluminum performed when the original tests were written.
For pilots flying or purchasing certified composite aircraft, the relevant question is whether that aircraft was certified against standards that understood composite failure modes under load and over time. These updates move that needle.
What Changed: Electrical Systems
The electrical system in a 1978 Cessna 172 is a relatively simple architecture: a single alternator, a battery, a master bus, and a handful of circuits. The electrical system in a modern certified single is a fundamentally different animal - dual-bus architectures feeding glass avionics, autopilots, ADS-B Out, traffic systems, weather datalinks, electronic ignition, and in some cases electric trim and flaps.
Then there is electric propulsion, where the electrical system is not a supporting character - it is the entire performance. There is no hydraulic backup, no mechanical disconnect, no alternative source of thrust if the electrical architecture fails. Certification standards for an electric aircraft’s power system are not incidental to airworthiness. They are the whole game.
The FAA’s acceptance of updated electrical standards is directly relevant to every electric aircraft currently in the certification pipeline. Companies like Pipistrel - whose Velis Electro has already achieved certification in Europe - and programs targeting the U.S. market need exactly this kind of regulatory clarity: what redundancy is required, which failure modes are acceptable, and which are not. Updated standards give manufacturers a clear target, and clear targets mean more efficient certification programs. More efficient programs mean electric aircraft move from press releases to actual ramp aircraft sooner.
How the FAA Accepts These Standards
Under the revised Part 23 framework, the FAA does not write the detailed technical standards itself - it accepts them from ASTM International. When the FAA formally accepts an updated ASTM standard, manufacturers can use it as a means of compliance: an approved pathway to satisfying the regulatory requirement.
Manufacturers are not locked into the ASTM standard. They can propose alternative means of compliance with sufficient engineering justification. But the ASTM standard is the paved road; everything else is bushwhacking. The FAA’s acceptance of this updated package extends that road - allowing manufacturers already in certification programs to use more appropriate test methods, and giving programs just starting a current baseline from day one.
The International Dimension
The FAA and EASA (the European Union Aviation Safety Agency) have bilateral agreements designed to allow an aircraft certified in one jurisdiction to gain recognition in the other without restarting the process from scratch. When Part 23 standards and their European equivalents converge, that process runs smoothly. When they diverge, manufacturers run two parallel certification campaigns at significant cost.
Updated standards that align with where international partners are headed reduce that burden. This matters directly for the economics of small aircraft manufacturing - and ultimately for whether new designs can reach competitive price points.
What This Means for Pilots Buying or Flying New Aircraft
The American general aviation fleet is old. The average age of a piston single in active U.S. service is well over 30 years. Many common training aircraft were built before most of the pilots flying them were born. Fleet renewal happens through new designs achieving certification and entering the market at accessible prices. Everything that makes certification more rational and efficient contributes to that outcome.
For pilots evaluating aircraft purchases over the next several years, type certificates issued under the updated Part 23 framework offer a more modern safety baseline than older designs certified against legacy rules. That is not a claim that older aircraft are unsafe - many are superbly designed and thoroughly airworthy. It is a prompt to ask informed questions during due diligence: How was this aircraft certified? Against which version of the standards? What means of compliance did the manufacturer use for stall characteristics?
These questions rarely come up during a demo flight. They should come up before the purchase agreement is signed.
For flight instructors working with pilots transitioning to new designs: the certification basis of the aircraft shapes how you should teach it. An aircraft designed to updated stall standards may behave quite differently at the edge of the envelope than what your students are accustomed to.
For anyone tracking the electric aircraft space: watch the electrical standards closely. The pace at which those standards mature and gain FAA acceptance is one of the key variables determining when electric trainers and commuters move from announcements to actual ramp aircraft at real airports.
Key Takeaways
- The FAA has accepted updated Part 23 standards covering stall behavior, airframe structures, and electrical systems, continuing the performance-based framework first established in 2017.
- Updated stall standards mean new type certificates reflect how modern designs - including electric and composite aircraft - actually behave at the edge of the envelope.
- Revised structural standards now address how carbon fiber composites fail under fatigue, which differs fundamentally from aluminum - a critical distinction for composite aircraft airworthiness across a full service life.
- Updated electrical standards are directly relevant to the electric aircraft certification pipeline, defining the redundancy and failure-mode tolerances the FAA requires for electric propulsion systems.
- Pilots evaluating new aircraft purchases should ask which version of Part 23 a design was certified against and what means of compliance the manufacturer used - questions for due diligence, not the demo flight.
Radio Hangar. Aviation talk, built by pilots. Listen live | More articles