The CFM RISE Open Fan Engine, the Unducted Architecture Reviving a Scrapped Nineteen-Eighties Concept With New Materials, and the Twenty Percent Fuel Burn Cut That Could Redraw Commercial Aviation After Twenty-Thirty-Five

CFM International's RISE program targets a 20%-plus fuel burn reduction over the LEAP by removing the nacelle entirely - reviving a 1980s concept with modern materials and blade design.

Aviation Technology Analyst

CFM International’s RISE program - Revolutionary Innovation for Sustainable Engines - is developing an open fan engine with no nacelle, using two counter-rotating rows of variable-pitch blades mounted at the aft end of the core. The stated goal is more than 20 percent reduction in fuel burn and CO₂ emissions compared to the current LEAP engine. Technology demonstrator flight testing is targeted for around 2026 or 2027, with commercial entry into service in the mid-to-late 2030s.

What the CFM RISE Engine Is - and Why It Has No Nacelle

The turbofan engines powering commercial narrow-bodies today share a fundamental architecture that has not changed in concept since the 1960s: a large fan enclosed inside an aerodynamic nacelle, generating thrust primarily through bypassed airflow. The CFM56 and LEAP engines - both made by CFM International, the 50/50 joint venture between GE Aerospace and Safran Aircraft Engines of France - have refined this concept to a very high level. The LEAP improved on the CFM56 by 15 percent or more in fuel efficiency.

RISE abandons the nacelle entirely. Instead of an enclosed fan, the engine mounts two rows of open, variable-pitch composite blades at the rear of the core, rotating in opposite directions. This counter-rotation recovers the swirl energy that a single blade row wastes in its wake, with each row seeing cleaner incoming flow as a result.

Why Removing the Nacelle Improves Fuel Efficiency

The nacelle provides real benefits - it contains the bypass flow, shapes the inlet and exhaust aerodynamics, reduces noise, and provides structural mounting. But it imposes a hard constraint: larger fan diameters mean larger nacelles, which mean more frontal drag and heavier mounting structures. The industry has been increasing fan diameter for 30 years, and the nacelles have grown correspondingly. At some point, those penalties outweigh the efficiency gains.

Without a nacelle, RISE can run blade diameters that would be physically impossible inside a conventional cowl. This achieves a very high effective bypass ratio - moving a large mass of air at moderate velocity - which is thermodynamically more efficient than what any nacelle-constrained design can match once the nacelle’s own drag and weight penalties are accounted for. The 20 percent fuel burn improvement over the LEAP is not a marketing figure; it reflects propulsive efficiency gains that are only accessible once the nacelle constraint is removed.

The 1980s Unducted Fan: The Same Idea, Why It Failed

The open rotor concept is not new. It was tested, it worked, and then it was shelved.

In the early 1980s, the oil crises of the 1970s had reshaped aviation economics and both GE and Pratt & Whitney began serious development of unducted fan concepts, sometimes called prop-fans. GE’s program produced the GE36 (also called the Unducted Fan, or UDF), using two counter-rotating rows of swept composite blades at the rear of a core turbine. It reached flight testing. Pratt & Whitney, in partnership with Allison, developed a competing design. Both programs accumulated real flight hours by the mid-1980s, and the efficiency numbers held up.

Then, in 1986, crude oil prices collapsed to roughly $10 per barrel. The economic case for a radical new propulsion architecture evaporated against a fleet that could keep burning cheap fuel for another generation. Neither Airbus nor Boeing placed development orders. The noise signature of the early designs was objectionable, particularly a tonal interaction between the two counter-rotating blade rows at takeoff frequencies. Vibration characteristics, maintenance unfamiliarity, and unanswered certification questions completed the picture.

The unducted fan went onto the shelf for 35 years.

Three Reasons RISE Is Different From the 1980s Programs

Materials. The GE36 blades were primarily metallic. Modern carbon fiber composite architectures allow the highly swept, three-dimensional blade profiles required to control shock wave formation and reduce the acoustic interaction between the two counter-rotating rows. The specific tonal noise problem that plagued the early designs was largely a blade interaction issue driven by pressure fields between the two rows - advanced blade geometry and controlled tip design, optimized through modern aeroacoustics modeling, directly attacks that problem. CFM has stated that meeting current noise certification standards is a design requirement from day one, not a problem to solve after the efficiency goals are met.

Computational tools. When GE tested the GE36, aerodynamic design and noise prediction required physical wind tunnel tests and significant engineering judgment. Modern computational fluid dynamics can simulate the complete three-dimensional flow field around both blade rows at every point in the flight envelope, predict acoustic signatures, and test hundreds of design iterations before a single physical part is manufactured. The design cycle that might have taken a decade of hardware testing in the 1980s can now arrive at physical testing with a far more mature design.

Variable pitch. RISE blades are designed to change their pitch angle continuously through the flight regime, similar to a constant-speed propeller. High pitch at takeoff, optimized setting at cruise, reduced pitch on approach - changing both thrust and acoustic character through the cycle. Variable pitch integration into a high-performance turbine application is a significant engineering challenge, but CFM has identified it as central to solving both efficiency and noise simultaneously, and has been testing the pitch change mechanism as a standalone technology demonstrator within the program.

The Hybrid-Electric Component, Explained

RISE incorporates a hybrid-electric element, but this requires careful framing. RISE is not an electric aircraft engine. The core turbine burning jet fuel is doing the primary propulsive work. The hybrid-electric component extracts electrical power from the core and uses it to drive accessories and assist the pitch change mechanism, recovering energy that would otherwise be wasted in certain parts of the flight cycle. It is a regenerative efficiency contributor, not a fundamental change in the engine’s character as a combustion turbine.

A Competing Approach: Pratt & Whitney’s Geared Turbofan

Pratt & Whitney, now part of RTX, has pursued a different philosophy with its Geared Turbofan architecture, which uses a gearbox to allow the fan to spin more slowly than the low-pressure turbine, enabling a larger fan diameter within a conventional nacelle than would otherwise be possible. The Geared Turbofan has had genuine commercial success powering the A320neo family. The debate between open rotor and advanced geared turbofan is genuinely contested in the propulsion engineering community. Neither camp is bluffing about the underlying physics.

The Integration Challenge: RISE Requires a New Airplane

A rear-mounted open rotor is not a drop-in replacement for an underwing turbofan. The aircraft that will use RISE does not exist yet.

Integrating an open rotor with a fuselage introduces problems that require an entirely new airframe design: managing the asymmetric thrust case in an aft-mounted configuration, addressing the acoustic and vibrational environment inside the cabin, and reworking the tail and empennage layout. Airbus has been developing internal studies for what a RISE-powered narrow-body would look like, but this is a new airplane certification program, not a derivative of anything flying today.

This airframe dependency is one of the significant schedule risks. CFM can deliver a certified engine on a timeline. But that engine needs an airplane, and that airplane requires its own independent multi-year certification program. Both have to proceed in rough synchrony for the entry-into-service date to hold.

Timeline: When Could RISE Enter Service?

CFM’s stated timeline puts RISE technology demonstrator flight testing beginning around 2026 or 2027. That is proof of concept, not the certification engine. The gap between a successful flight demonstrator and a certified commercial engine is where programs historically accumulate significant schedule delay.

A realistic entry-into-service date is somewhere in the mid-to-late 2030s. Mid-2030s is achievable if the flight test program proceeds cleanly and a parallel airframe program advances on schedule. Late 2030s is fully plausible if either program encounters a significant technical surprise.

Sustainable Aviation Fuel and the Long-Term Emissions Picture

CFM built 100 percent SAF compatibility into the RISE requirements from the program’s inception. Current certified engines are limited to blends of up to 50 percent SAF due to material and performance certification constraints. Full drop-in compatibility requires that the engine certification cover the complete property range of sustainable aviation fuel across all operating conditions.

RISE entering service with both its fuel burn efficiency gains and full SAF compatibility would represent a substantial reduction in lifecycle carbon emissions compared to current-generation aircraft. But the fleet renewal math is sobering. Even with a 2035 entry into service, reaching meaningful fleet penetration takes another 20 years as airlines retire and replace aircraft on natural cycles. The full emissions impact of RISE, if it delivers on its promises, would be felt in the 2050s. The engineering decisions being made now will determine what the global narrow-body fleet looks like three decades from today.

The economics driving RISE are structurally different from those that killed the GE36 in 1986. Fuel cost projections trend upward. Carbon carries a price - through regulation or carbon markets - that makes efficiency gains permanently valuable regardless of crude oil fluctuations. The noise problem has a credible engineering solution pathway. The materials to execute that solution exist. The GE engineers who flew their demonstrator in the mid-1980s knew the efficiency was real. They were not wrong. They were early.


Key Takeaways

  • CFM RISE is an open fan engine with no nacelle, using two counter-rotating rows of variable-pitch composite blades, targeting more than 20 percent better fuel burn than the current LEAP engine.
  • The concept was successfully demonstrated in the 1980s as the GE36 but was shelved when oil prices collapsed to around $10/barrel in 1986 - the physics worked; the economics didn’t.
  • Three changes make the program viable now: advanced composite blade materials that solve the 1980s noise problem, modern computational fluid dynamics that compress the design cycle, and variable pitch that optimizes efficiency and acoustics across the flight envelope.
  • RISE needs a new airframe, not a re-engined existing aircraft - integrating an aft-mounted open rotor requires a clean-sheet airplane design and its own independent certification.
  • Technology demonstrator flight testing is targeted for 2026–2027; commercial entry into service is projected for the mid-to-late 2030s, with meaningful fleet impact extending into the 2050s.

Radio Hangar. Aviation talk, built by pilots. Listen live | More articles