The Aviat Eagle II, the Aerobatic Biplane Frank Christensen Proved Could Be Built in a Garage and Still Fly Like It Was Made in a Factory, and the Kit Aircraft Legacy That Changed What a Homebuilder Could Aspire To
The Aviat Eagle II is a homebuilt aerobatic biplane kit that Frank Christensen engineered in the 1970s to give dedicated builders access to unlimited aerobatic performance.
The Aviat Eagle II is a two-seat aerobatic biplane kit capable of +6/-5 G unlimited aerobatics, built around a 200-horsepower Lycoming AEIO-360 with a full inverted oil system. Developed from a design first flown in 1977 by engineer and airshow pilot Frank Christensen, the Eagle line redefined what a kit aircraft could be - fully engineered, exhaustively documented, and genuinely completable by a builder with no prior aircraft manufacturing experience. A photograph of pilot Jeff Starr’s completed homebuilt Eagle II, published by AVweb in November 2026, brought renewed attention to a design that has been inspiring builders for nearly five decades.
What Frank Christensen Was Trying to Fix
In the 1970s, a pilot who wanted to fly unlimited aerobatics faced a narrow choice. Factory-built competition aircraft were expensive. Scratch-built alternatives - the Pitts Special, the Stephens Akro - demanded not just a builder’s time but a machinist’s skill set. Plans were often vague. Materials were inconsistent. The Experimental category had a reputation, some of it earned, for projects that ended badly.
Christensen believed there was a middle path. He set out to engineer a kit the way an aerospace company builds a production aircraft: every piece of aluminum pre-formed to the correct angle, every hardware item called out by part number, every step documented with photographs and dimensions. The builder’s job would be assembly - precise and careful, but assembly rather than engineering from scratch.
That philosophy produced the Christen Eagle I, a single-seat aerobatic kit that flew for the first time in 1977. It was immediately apparent that Christensen had done something genuinely different.
What the Eagle II Actually Is
The Eagle II is the two-seat evolution of that design. It carries full dual controls, making it capable of training aerobatic pilots with an instructor in the back seat - or simply sharing the experience with a passenger up front. It is not a mild-aerobatics aircraft.
The airframe is rated to +6 G upright and -5 G inverted. That is the same performance envelope as aircraft flown at national aerobatic championships. The design is certified for the unlimited category.
The powerplant, the Lycoming AEIO-360, earns its designation character by character. The A indicates fuel injection. The I indicates an inverted oil system - the component that separates a true aerobatic engine from a standard one. Without an inverted oil system, negative-G flight starves the engine of lubrication within seconds. The AEIO-360 can run inverted indefinitely. That is what makes sustained inverted flight, outside loops, and negative-G figures possible.
The wings use a symmetrical airfoil - a detail that matters more than it might appear. A symmetrical airfoil generates the same lift coefficient upright as inverted, so the aircraft handles consistently regardless of orientation. The Eagle II was designed to be inverted. It expects to be there.
The Build: What 1,500 to 2,500 Hours Looks Like
Jeff Starr built the aircraft in the AVweb photograph himself. Every rib, every spar, every control cable.
The typical Eagle II build runs 1,500 to 2,500 hours, spread across years of evenings and weekends. Experienced kitbuilders describe the construction sequence as logical and clean - a direct result of Christensen’s documentation philosophy - but the total work involved is substantial by any measure.
Under the FAA’s Experimental Amateur-Built category, an aircraft qualifies if the builder personally completes more than 50 percent of the fabrication and assembly. That “major portion rule” ensures the homebuilder is genuinely building the aircraft, not assembling a factory-finished product. The Eagle II’s detailed kit keeps builders fully inside that threshold without leaving them to improvise.
The finished aircraft receives an Experimental airworthiness certificate. It cannot be used for commercial operations or carry passengers for hire. The builder may also apply for a repairman certificate, which authorizes them to perform maintenance that would otherwise require a certificated mechanic. For a pilot who built the aircraft and understands every system in it, that certificate is a natural extension of the build itself.
Why This Matters for Pilots Considering a Build
The economics of homebuilding are real. A factory-built aircraft with equivalent aerobatic performance would cost significantly more than a completed Eagle II. When a builder absorbs the labor personally, the finished aircraft can be worth considerably more than the sum of its parts.
But cost rarely drives Eagle II builders. The more honest explanation is what Christensen himself was after: the ability to build something that actually flies, not restore someone else’s work or acquire a finished product, but to take raw aluminum and assemble something capable of pulling six Gs on demand. That outcome is not replicable any other way.
Christen Industries, Christensen’s original company, eventually became Aviat Aircraft, based in Afton, Wyoming. The Eagle II kit still ships from there today. Aviat also produces the Husky, a bush plane designed for rough strips and remote terrain - an aircraft that shares a company address and a manufacturing philosophy with the Eagle II, and almost nothing else.
The Community That Keeps It Going
The Eagle II’s standing in the homebuilt world is well established. When pilots discuss benchmark kit aircraft for serious aerobatic use, the Eagle II appears on a short list in almost every conversation. The design is proven. Parts support exists. The community of flying examples is large enough that builders can find maintenance experience, connect with other owners, and get answers to questions the manuals do not fully address.
The Experimental Aircraft Association (EAA) has built an entire culture around that kind of knowledge transfer. Chapters nationwide host build workshops, technical counselor visits, and monthly meetings where builders at every stage of a project share the same room. The accumulated knowledge in those gatherings - the kind of institutional memory that shows a first-time builder how a tricky rib attachment works in ninety seconds - does not exist in any manual. It lives in the people who have already done the work.
EAA AirVenture, held each summer in Oshkosh, Wisconsin, is where that culture concentrates. The homebuilt flight line stretches across the grounds: Eagles alongside Van’s RVs, Lancair Legacys, Glasair Sportsmans, each one representing years of a builder’s life translated into something airworthy. The Grand Champion award in the homebuilt category is among the most coveted honors in aviation.
A photograph like the one AVweb published this week does the same work at a smaller scale. Someone sees Jeff Starr’s Eagle II pulling through a climbing turn and starts wondering whether they could do that too. They find the kit. They find the forums. They start doing the math on hangar space. The idea takes root.
That is how the homebuilt movement has sustained itself for fifty years. Frank Christensen could not have anticipated, when he decided to engineer a comprehensive aerobatic kit in the 1970s, that his aircraft would still be generating that chain reaction in 2026. The photograph is the evidence that it does.
Key Takeaways
- The Aviat Eagle II is a homebuilt aerobatic biplane rated to +6/-5 G, powered by a 200-hp Lycoming AEIO-360 with an inverted oil system - genuine unlimited aerobatic capability built in a garage.
- Frank Christensen pioneered the concept of a fully engineered, completely documented aerobatic kit in 1977, designed so that a builder with no manufacturing background could produce a competition-capable aircraft through precise assembly.
- Typical build time runs 1,500 to 2,500 hours; the finished aircraft qualifies under the FAA’s Experimental Amateur-Built category provided the builder completes more than 50 percent of fabrication and assembly.
- The Eagle II’s symmetrical airfoil and inverted oil system are not incidental features - they are what make unlimited aerobatics structurally and mechanically possible.
- Aviat Aircraft in Afton, Wyoming still produces the Eagle II kit today, supported by an established builder community, parts network, and decades of flying examples.
Radio Hangar. Aviation talk, built by pilots. Listen live | More articles