Military Operations Areas, the Cross-Country Charts Covered in Pink Hatching, and the Call That Tells You Whether the Sky Is Actually Yours
Understand what the pink hatching on your sectional chart actually means, when you can legally fly through a Military Operations Area, and how to check whether one is active before you go.
The pink hatched regions on a sectional chart - labeled things like “Vance One Alpha” or “Fort Drum” - are Military Operations Areas (MOAs). Unlike Restricted Areas, MOAs do not prohibit VFR flight. But flying through one without knowing whether it’s active is a different problem entirely, and your sectional chart cannot answer that question for you.
What Is Special Use Airspace?
The FAA has designated portions of the national airspace system for activities incompatible with unannounced civilian traffic. These designations are collectively called Special Use Airspace (SUA), and they exist independently of airport-based controlled airspace like Class B, C, and D. Each type maps to a specific hazard - the designations are not arbitrary.
The main types a cross-country pilot will encounter are Restricted Areas, Warning Areas, Military Operations Areas, Alert Areas, Controlled Firing Areas, and National Security Areas. Knowing which is which matters both for practical route planning and for your checkride.
What Are Restricted Areas?
Restricted Areas carry an “R-” designation followed by a number (e.g., R-2755). Entry requires specific authorization from the controlling agency - no authorization, no entry. The hazards inside are genuine: aerial gunnery, missile testing, rocket launches, and drone operations at altitudes and speeds that pose immediate danger to arriving aircraft.
The Chart Supplement (formerly the Airport/Facility Directory) lists each Restricted Area by number, including altitudes, hours of use, and the controlling agency. That agency - usually a military branch - can authorize entry. Without that authorization, you stay outside. There is no gray area.
What Are Warning Areas?
Warning Areas use a “W-” designation and appear on the chart with the same blue hatching as Restricted Areas. The distinction is jurisdictional: Warning Areas exist beyond the 3-nautical-mile boundary of U.S. territorial airspace, over international waters.
Because the FAA has no authority to legally restrict international airspace, they designate it a warning area instead of a restricted area. The hazards inside are identical - live gunnery, missile testing, high-speed military operations. As a civilian in international airspace, you cannot be legally prohibited from entering. You can just fly into active fire. The warning is sincere.
Can You Fly Through a Military Operations Area?
Yes - VFR pilots are legally permitted to fly through an active MOA. This surprises many students, so it’s worth stating clearly. MOAs are not restricted airspace.
What an MOA designation tells you is that military aircraft may be operating inside that block of sky in ways that are fast, aggressive, and unpredictable: tactical fighter training, intercept practice, formation flying at high energy, low-altitude maneuvering. These are not aircraft transiting from point A to point B. The Aeronautical Information Manual states that VFR pilots should exercise extreme caution when flying through an active MOA and should contact the controlling agency - but entry is legal.
Whether legal is also smart depends entirely on one piece of information your sectional cannot provide.
How Do You Find Out if an MOA Is Active?
MOAs list charted altitudes and charted times of use. A chart might show a given MOA active Monday through Friday, 0600–2200 local. But those charted times are a window, not a schedule. Within that window, the MOA can be “hot” (military aircraft actively operating inside) or “cold” (empty sky).
Call Flight Service before departure. The number is 1-800-WX-BRIEF (1-800-992-7433). Ask the briefer whether the specific MOA will be active during your proposed transit window. The military files NOTAMs (Notices to Air Missions) to activate and deactivate MOA segments in real time, and that information flows directly into the Flight Service briefing system.
If you’re already airborne on VFR flight following, ask the Center controller covering that sector. Center coordinates with the military throughout the day and can usually give you a direct answer or hand you off to someone who can. The Chart Supplement also lists controlling agency frequencies for a direct call to the military unit.
What Should You Do When an MOA Is Hot?
A cold MOA is easy: route direct and save the fuel and time. There is no good reason to add miles for a hazard that doesn’t currently exist.
A hot MOA requires a decision based on what’s inside and at what altitude. Two options:
Continue with radar advisories. When ATC sequences civilian traffic through an active MOA, the military aircraft inside are required to stay clear of participating traffic. This is not a guaranteed separation standard - a fighter executing a snap roll at 450 knots has a very different sight picture than a Cessna cockpit - but radar advisories put more eyes on the situation than flying through unannounced.
Reroute around the MOA. If the MOA is hot, the active altitude block matches your planned cruise altitude, and especially if the routing involves terrain that already demands attention to energy management, the extra miles can be the right call. Calculate the additional fuel, check weather on the alternate route, and make the decision that fits the flight.
What Are Alert Areas, Controlled Firing Areas, and National Security Areas?
Alert Areas carry an “A-” designation. They typically cover locations with extremely high volumes of flight training activity or unusual aerial operations such as parachute drop zones. The critical difference from an MOA: in an Alert Area, both civilian and military/training pilots share equal responsibility for collision avoidance. No permission is required to enter, but traffic density can be significant.
Controlled Firing Areas (CFAs) do not appear on sectional charts - intentionally. Operations inside a CFA are required to cease the moment a non-participating aircraft enters the area. Someone is watching radar. When you appear on scope, they stop. You will never know you flew through one.
National Security Areas (NSAs) appear around sensitive facilities - nuclear plants, certain government installations - where security considerations require altitude buffers. The FAA requests voluntary avoidance. Unless a NOTAM makes an NSA temporarily restricted, entry is not legally prohibited. The request carries weight, and NSAs should be noted during preflight planning.
How Do You Answer MOA Questions on a Checkride?
Examiners favor scenarios over definitions. A strong answer demonstrates that you understand what the chart tells you, what it doesn’t, and how to fill the gap.
Scenario: Your direct cross-country route passes through an MOA. The chart shows it active Monday through Friday, 0600–2200. Your flight is Thursday morning.
Answer: Note the MOA on the sectional and reference the Chart Supplement for the altitude block, controlling agency, and contact frequency. Check NOTAMs through the EFB for any activation or deactivation within the flight window, then call Flight Service for current MOA status. If cold, route direct and consider picking up flight following for general traffic awareness. If hot, weigh continuing on radar advisories - with ATC coordinating traffic separation with the controlling agency - against rerouting based on the altitude block and terrain. Final routing depends on that status call.
That answer shows the right resources, an understanding of what the chart does and does not say, and a decision process rather than a default rule.
The underlying logic is consistent across all Special Use Airspace: Restricted Areas have hard hazards requiring authorization. MOAs have high-speed maneuvering traffic requiring situational awareness and a status call. Alert Areas have training saturation requiring collision vigilance from everyone inside. Once the logic holds, the rules follow naturally.
Key Takeaways
- MOAs do not prohibit VFR flight - they designate airspace where high-energy military maneuvering may be occurring
- Charted MOA hours are a window of possible use, not a confirmed schedule; always call Flight Service to confirm active/inactive status
- 1-800-WX-BRIEF (1-800-992-7433) is the number to call before any flight through an MOA; Center controllers can also help in the air
- Restricted Areas require authorization to enter; MOAs require information before entering
- Controlled Firing Areas don’t appear on charts because operations inside stop automatically when you enter
Radio Hangar. Aviation talk, built by pilots. Listen live | More articles