Fire Retardant and the Hidden Corrosion Eating Through the Airtanker Fleet
An NTSB investigation found extensive corrosion on two airtankers following exposure to a newer fire retardant formulation during a 2023 evaluation - raising urgent questions about aircraft airworthiness standards.
An NTSB investigation has found extensive corrosion on two airtankers directly linked to a newer firefighting retardant formulation used during a 2023 evaluation period. The finding raises serious questions about whether current retardant certification standards adequately protect aircraft structure under real operational conditions. The investigation was still ongoing as of AVweb’s reporting, meaning formal safety recommendations have not yet been published.
What the NTSB Found
The word “extensive” in the NTSB’s findings is significant. This is not surface oxidation addressed by a standard wash and inspection. Extensive corrosion on an airframe is a structural concern - the kind of finding that grounds aircraft and forces operators to re-examine fundamental maintenance assumptions.
The investigation centers on a newer retardant formulation that the United States Forest Service and the aerial firefighting industry had been evaluating. Older formulations have decades of operational history behind them. Operators know the cleaning procedures, the dwell times, and the consequences of incomplete post-mission flushing. A new formulation changes that equation in ways that may not be immediately visible.
How Fire Retardant Chemistry Works - and Where It Goes Wrong
The distinctive red-pink color of aerial fire retardant comes from a pigment added so pilots and air tactical supervisors can identify previously treated terrain. The base chemistry is traditionally an ammonium phosphate compound - essentially fertilizer salts - effective at slowing combustion by coating fuel ahead of the fire line.
Ammonium phosphate residue left on aluminum structure long enough, without proper neutralization and rinsing, is capable of causing corrosion. The Forest Service requires that retardant formulations meet specific corrosivity limits before receiving approval for use, and manufacturers must certify compliance. The question this investigation raises is whether the certification testing methodology adequately replicates real operational conditions - or whether actual field use produced a corrosion environment the testing process did not catch.
The Regulatory Gap Between USFS and FAA
Two separate agencies govern the components at the center of this issue. The Forest Service sets retardant certification standards. The FAA sets airworthiness standards for the aircraft. They operate under different mandates, different technical staffs, and different regulatory frameworks.
The question of whether a retardant certified as meeting Forest Service corrosivity limits can still produce corrosion that compromises FAA airworthiness requirements represents a gap in the regulatory seam between those two agencies. That gap is not the result of negligence - it is the kind of oversight boundary that only becomes visible when something goes wrong. This investigation has the potential to close it.
Why Operational Tempo Makes This Worse
After every drop mission, airtankers are flushed and cleaned to remove retardant residue. At a busy reload base during an active large fire, that process can be compressed. When an aircraft is turning around quickly because demand is high, cleaning may be less thorough than it would be under lower-pressure conditions. That is not negligence - that is the operational reality of aerial firefighting.
If the newer formulation is more chemically aggressive than what it replaced, or behaves differently in terms of how quickly it attacks aluminum when not fully removed, the same cleaning protocol that worked adequately for the previous product may be insufficient for the new one. Testing should catch that discrepancy before the product reaches the field. When it does not, the result is findings like this one.
Why This Matters Beyond the Tanker Fleet
The aerial firefighting fleet is small, specialized, and expensive. Many of these airframes are converted airliners, regional jets, and turboprops structurally reinforced for the tanker role. When a platform is pulled for corrosion remediation, that is not only a maintenance cost - it is one fewer aircraft available during peak fire season, when demand for air resources is at its highest and fires do not wait for maintenance cycles to complete.
Fire seasons in the American West now extend from early spring well into fall. More missions per aircraft per season means more cumulative exposure to retardant chemistry and more pressure on the cleaning protocols designed to protect the airframe between sorties. The compounding effect is not theoretical.
The NTSB’s Track Record on Airtanker Safety
This is not the first time the NTSB has scrutinized the aerial firefighting fleet. Following a series of catastrophic structural failures on large airtankers in the early 2000s - failures that killed pilots - the fleet underwent significant regulatory and maintenance reform. The air tanker board was reconstituted, older aircraft that could not pass structural inspection were grounded, and the industry adopted a more rigorous maintenance and inspection culture.
The current investigation involves a different mechanism - chemical corrosion rather than structural fatigue - but it reflects the same underlying challenge. These aircraft do hard, repetitive work in demanding conditions, and the safety community has to stay ahead of the ways that work degrades the airframe over time.
What the Investigation Is Expected to Produce
When the NTSB publishes its final report, recommendations will go to the Forest Service, the FAA, and the airtanker operators. Those recommendations could involve modifying the retardant formulation itself, revising post-mission cleaning protocols to address the specific corrosion mechanism identified, increasing inspection frequency for aircraft exposed to the newer formulation, or some combination of all three.
One point is worth acknowledging directly: this problem was identified during an evaluation period, not following an accident. Evaluations exist precisely to catch issues before they produce catastrophic outcomes. Someone in this process flagged something that looked wrong. The NTSB investigated. That is the safety system functioning as designed - and in a fleet operating at this risk level, that matters.
For anyone involved in aerial firefighting operations, this is worth attention now, not when the final report is published.
Source: AVweb
Key Takeaways
- The NTSB found extensive corrosion on two airtankers following exposure to a newer fire retardant formulation during a 2023 evaluation - a structural concern, not routine surface wear.
- The investigation questions whether Forest Service retardant certification testing adequately replicates operational conditions and whether a compliant formulation can still compromise FAA airworthiness standards.
- High operational tempo at reload bases can compress post-mission cleaning procedures, amplifying the risk when a more aggressive retardant chemistry is introduced.
- A regulatory gap between the USFS and FAA exists at exactly the boundary where this problem lives; this investigation has the potential to formally close it.
- The finding came from an evaluation, not an accident - the safety system caught it early, but the response must now be proportionate, documented, and in place before the next fire season.
Radio Hangar. Aviation talk, built by pilots. Listen live | More articles