FAR Ninety-One Point Four Oh Nine, the AVIATE Inspection Stack Every Student Gets Wrong, and the Six Airworthiness Clocks Running on Every Airplane You Fly

The AVIATE mnemonic covers all six airworthiness inspection requirements under FAR Part 91 - here's what each clock means and when it applies.

Flight Instructor
Reviewed for accuracy by Matt Carlson (Private Pilot)

Every aircraft flying in the United States must meet a stack of inspection requirements before it is legal to operate - and not all of them apply to every flight. The AVIATE mnemonic covers all six: Annual, VOR check, Inspections (100-hour and ADs), Altimeter/pitot-static, Transponder, and ELT. Understanding which requirements apply to which type of operation is exactly what examiners test during oral checkrides.

What Is the AVIATE Inspection Stack?

AVIATE is the memory aid that organizes the airworthiness inspection requirements under FAR Part 91. Each letter represents a different inspection with its own interval, its own regulatory citation, and - critically - its own set of conditions that trigger it.

Some clocks run on every aircraft. Others only kick in for instrument flight rules (IFR) operations. Some only apply when flying for hire. Working through the stack systematically, and knowing which items apply to the specific flight you’re planning, is the core skill.

A - Annual Inspection: How Does the 12-Month Calendar Rule Actually Work?

Under FAR 91.409(a), no aircraft may be operated unless it has been inspected within the preceding 12 calendar months by a certificated airframe and powerplant (A&P) mechanic holding an Inspection Authorization (IA).

The phrase “calendar months” is where pilots get tripped up. If an annual was completed on November 15, it does not expire on November 15 of the following year. It expires at the end of November - the last day of the twelfth calendar month following the inspection. The airplane is legal through November 30.

That same rule works in your favor too. An annual completed on January 3 expires at the end of January 31 the following year - giving more runway than the date stamp alone suggests.

One more thing: a completed annual does not automatically mean the airplane is airworthy. The IA signs off that the inspection was performed and that discrepancies were corrected. If discrepancies are listed and not resolved, the aircraft is not airworthy - even if the annual was signed that morning. When reviewing maintenance records, look not just for the annual entry but for what was found and what was done about it.

V - VOR Check: When Is It Required and How Is It Logged?

The VOR check only applies to IFR operations. Under FAR 91.171, any VOR used for IFR navigation must have been checked within the preceding 30 days - not calendar months, actual days.

There are several approved methods, each with a different allowable error:

  • VOT (VOR Test Facility) or airborne checkpoint: ±4 degrees
  • Ground checkpoint: ±6 degrees
  • Dual VOR cross-check (ground): ±4 degrees difference between the two receivers

The regulation requires logging the check: date, place, bearing error, and your signature must go into a maintenance record or the aircraft log.

For VFR-only flights, this check is not required. But pilots working toward an instrument rating should build the habit now.

I - Inspections: What’s the Difference Between the 100-Hour and an Annual?

Two distinct items live under this letter: the 100-hour inspection and airworthiness directives (ADs).

The 100-hour inspection comes from FAR 91.409(b). It applies when an aircraft is used for hire to carry passengers or to give flight instruction for hire. The critical phrase is “for hire” - if money is changing hands for the flight or the instruction, the 100-hour clock is running.

The scope of a 100-hour inspection is essentially identical to an annual. The difference is authorization: an annual must be signed by an IA, but a 100-hour can be signed by any certificated A&P mechanic.

There is a 10-hour ferry allowance. If the aircraft exceeds 100 hours during a cross-country before reaching a maintenance facility, it may be flown up to 10 additional hours to get there - no passengers for hire during those hours. Those 10 hours do not reset the clock; the next 100-hour still runs from the original due point.

Airworthiness directives are legally enforceable regulations issued by the FAA mandating corrective action on specific aircraft, engines, appliances, or components. They come in two types:

  • One-time ADs: Complete the action once, document it, done.
  • Recurring ADs: Repeat at specified intervals - every X hours or X calendar months - indefinitely. Recurring ADs transfer with ownership and never expire.

When reviewing maintenance logs, look for a summary of applicable ADs for the aircraft type, and for every recurring AD, verify the last compliance date and next due entry. A fresh annual does not make an airplane airworthy if a recurring AD just came due.

A - Altimeter and Pitot-Static Check: What Does It Test and How Often?

Under FAR 91.411, aircraft operating in controlled airspace under IFR must have their altimeter and pitot-static system inspected within the preceding 24 calendar months.

This is an in-shop test - a certificated repair station pressure-tests the static system for leaks and verifies the altimeter meets the accuracy standards in Appendix E of FAR Part 43. It cannot be verified on the ramp.

The same calendar month logic applies: a check performed in October is current through the end of October two years later.

Many flight schools send aircraft for the altimeter and pitot-static check at the same time as the annual since the airplane is already in the shop. Check it as a separate line item regardless - do not assume it was done simply because the annual is current.

T - Transponder: Which Airspace Requires a Current Certification?

FAR 91.413 requires that transponders operated in Class A, B, or C airspace, or any airspace where transponder operation is required, must have been checked within the preceding 24 calendar months.

Same in-shop requirement as the altimeter check. The transponder check verifies that the unit is transmitting altitude information accurately and that signals meet technical standards.

The 24-month cycles for the altimeter check and the transponder check are independent. They do not have to expire at the same time. Even when done together at the same shop visit, check both entries separately.

E - ELT: What Are the Two Separate Tracking Requirements?

The emergency locator transmitter (ELT) is governed by FAR 91.207. Modern units broadcast on 406 MHz and interface with the COSPAS-SARSAT satellite search and rescue network. Older units broadcast on 121.5 MHz.

There are two distinct requirements to track:

Battery replacement is required when 50% of the battery’s useful service life has been consumed - based on the manufacturer’s rated life stamped on the battery. Replacement is also required after the ELT has accumulated more than one cumulative hour of operation, including accidental activations.

Inspection of the ELT itself must occur within the preceding 12 calendar months, covering proper installation, battery condition, controls and indicators, and signal presence at the antenna.

A note on older 121.5 MHz units: COSPAS-SARSAT stopped processing 121.5 MHz signals from satellites in 2009. An older unit will still broadcast and can be monitored by overflying aircraft, but the satellite network is no longer listening for it.

How Do You Apply the Full AVIATE Stack to a Preflight Logbook Review?

Building a logbook review into every preflight is a two-minute habit once you know what to look for. Run through each item and confirm it applies to the planned flight:

  1. Annual entry - most recent date, any open discrepancies?
  2. 100-hour entry - required for hire operations; last entry and next due?
  3. Recurring AD compliance - each AD’s last compliance date and next due interval?
  4. Altimeter/pitot-static check - required if IFR; date within 24 calendar months?
  5. Transponder check - required in Class A, B, C and transponder-required airspace; date within 24 calendar months?
  6. ELT battery date - within 50% of service life? ELT inspection within 12 calendar months?
  7. VOR check - required if IFR; within 30 days?

Your flight school will also have a squawk sheet or discrepancy log for each aircraft. Check it, and if anything is written up, confirm it has been addressed before assuming the airplane is ready to fly.

If a listed discrepancy’s airworthiness status is unclear, that conversation belongs with your instructor or chief flight instructor before you approach the runway.

Key Takeaways

  • AVIATE covers six inspection requirements under FAR Part 91 - each with its own interval, citation, and applicability conditions.
  • The calendar month rule means inspections expire at the end of the twelfth (or twenty-fourth) month following completion, not on the anniversary date.
  • Annual and 100-hour inspections are not automatically interchangeable - who can sign them off and when they’re required differ.
  • An airplane with a current annual can still be unairworthy if a recurring AD is overdue or discrepancies were not corrected.
  • VOR check and altimeter/pitot-static check are IFR-only requirements; the transponder check applies to any aircraft operating in transponder-required airspace.
  • The ELT has two separate clocks: a 12-month inspection interval and a 50%-of-service-life battery replacement rule.

Radio Hangar. Aviation talk, built by pilots. Listen live | More articles